Jump to content
SAU Community

Recommended Posts

I just went to the local Auto1 and got a set of bendix pads... so yeah, just pop down the local whatever, you don't need a special sort but don't expect them to be on the shelves in vast quantaties.... the sad fact is, you own an imported skyline... parts are a lil harder to get than just picking it off the shelf (usually)... but i'm sure you already know that....

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-629079
Share on other sites

haha yeah, Wouldnt change it for the world though. Ive only had the car for a few weeks, but i dont think the novelty will wear off in the near future.

Back on topic tho, good to hear, i wasnt sure if they were hard to come by or if i needed specialty pads to fit etc.

Thanks for your help

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-629092
Share on other sites

Actually guys, just went down to supacheap autos in bundy to get some pads, looked in the bendix book and they had listings for all the skylines. Though i have an R31, i did notice that they even stocked R32's and 33's, not sure about 34's though.

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-629965
Share on other sites

I'd highly recommend the RB74 pads front www.racebrakes.com.au

These pads are rated higher than the entire Bendix range and won't fade anytime soon compared to the Bendix range (well on a track that is). From memory they cost me ~$150 for a set of front and maybe $140 for a set of rear pads.

Bendix will fade quicker and put more black shit on your wheels than you could imagine.

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-630035
Share on other sites

I would do as Ben says and get yourself a pair of RB74's. They crap all over any Bendix pad you care to mention.

They cost more but are worth every cent. Less noise, less dust, and better temperature tolerance than Bendix pads.

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-630651
Share on other sites

Do you drive down any long hills? Ok it's not so important especially if you have a manual box, but brake fade under normal driving conditions is something to consider. I dunno, I just never skimp on brake pads or fluid. Not when a full set of 4 pads is less than one tyre for me, and they last 3-4 times as long.

Bendix Ultimates are the bare minimum pad I will accept, but I don't like them because of the amount of noise, dust, and disc wear they cause.

Also don't forget about your brake fluid when replacing your brakes. Caltex GP600 is probably the best dot 4 fluid out there, surpassing many dot 5's in temperature tolerance, but with none of the drawbacks (eg, the sponginess you can get with silicone fluids).

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-630666
Share on other sites

I have had them on my Alfa Romeo with matching EBC Turbo rotors (grooved and drilled, but not drilled all the way through for strength) for about 2-3 months now and have taken them on track only once but whenever I get a chance to let a friend drive the car I always get them to floor the brakes at speed to show off how great the brakes are. They are unbelievable! So gerat that the ABS doesn't even kick in unless it's really provoked.

I am not sure how worn they are, although when I installed them they were rubbin on the rotors, even without braking and this went away after my track day so I assume I have worn them down some.

I'm looking forward to getting them for my GT-R too. The brakes on my Alfa are so much better, feel better, more progressive than the brakes on my R32 GT-R.

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-630736
Share on other sites

Justinfox, how long have you had them for? I have heard that they are very soft and don't last a long time, and cost like $200 a pair.

I've got greenstuff's on the front of mine. Go them at around 45,000km, and the clock has just ticked over to 85,000km. I'd say that they would have about 30-35% left on them.

I love the initial bite on the greenstuffs. No need drag the brakes to warm them up. They just bite and then get better. I have never noticed any brake fade on them, even after going down the Clyde mountain at warp 5 :D Down the bottom they were just as good as they were up the top.

The big killer is price, got mine for about $220.

My advise would to look around. I'm sure there would be better value for money brake pads out there, so it depends on what sort of money your willing to spend and what your driving style is.

J

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-630785
Share on other sites

Duncan, NOT having a go at you mate but it would be great if you were to tell us why you found the greenstuff pads dissapointing? Constructive crit goes a long way on a forum.

I've been on other forums before, non skyline related, and many forums are the same. Even when you search for help you get a lot of threads which contain a lot of posts but almost confuse you more than clear anything up for you afterwards!!!

Link to comment
https://www.sau.com.au/forums/topic/31159-brakes/#findComment-631600
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...