Jump to content
SAU Community

Help Me Make My R33 Flutter :)

Alexxs

By Alexxs,
in General Maintenance

 Share

Recommended Posts

Samon Proficient

Samon

Posted
Posted
go on google, you will find it, esspecially on vl turbo forums..

but the easiest way to do it. is unbolt your blow off valve, get that gasket and trace it onto a drink can then cut it out, then bolt up your blow off valve back to how it was.. only put that small bit of tin between the gasket and the blow off valve.. thats the way i done it, and occasioanly when i get bored i change it around.

An even easier way:

Grab a standard plastic bottle top... i.e. off a coke bottle or whatever. Take the plumback hose off the BOV, push the bottle top down the hose a little, and put it back on. It can't go any further down, as it'll hit the solid plumback line, but it will just block it off nicely. You can even drill a hole in the middle if you want to reduce the flutter a bit without killing it completely...

I did this on my 33 a while back... got sick of the hektik flutterz after a while so I took it out... I found I got about another 1-2PSI extra as the bleed hole wasn't... well... bleeding :cheers:

**RB2530** Proficient

**RB2530**

Posted
Posted
hahaha the mirror was a nice touch.

so let me get this straight. your approach is similar to the playing card in the bmx spokes?

patent that mthrfkr!!

Patent already pending my friend...

A vent to atmosphere variant of this model is also available...Main difference is you use a tyre tube and a nail.

1. Pump a tyre tube and mount it under you bonnet somewhere..fake carbon fibre brackets are available...

2. Mount the hinge and nail next tyre tube. Back off throttle, nail into tyre tube and phtssshhhhh!!!

Highway patrol pull you over...

"Son you have a vent to atmosphere BOV!! -They are illegal!!"

"No I dont officer... It's one of RB2530s new patented 'Legal' riceomatic pseudo BOVs....." "They ARE legal, I''l be on my way thanks"...

:cheers:

  • 3 years later...
MrRx7s3 Mentor

MrRx7s3

Posted
Posted

go on google, you will find it, esspecially on vl turbo forums..

but the easiest way to do it. is unbolt your blow off valve, get that gasket and trace it onto a drink can then cut it out, then bolt up your blow off valve back to how it was.. only put that small bit of tin between the gasket and the blow off valve.. thats the way i done it, and occasioanly when i get bored i change it around.

Thats exactly how I've done it except with a solo can :D haha lol, around 10000kms later it still works great, and no stalling issues either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • MBS206
      R34 gtt rb25det neo timing belt kit

      By MBS206 · Posted

      It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...