Jump to content
SAU Community

Recommended Posts

I am selling my ride and I am deciding to remove most of the parts. I think its easier to sell of a stock car rather than selling it the whole package.

Engine Block $3800.00

RB25DET w/Bored and Coated Block

RB26DETT Crankshaft

87mm WISECO Pistons

CROWER Conrods

ARP Headstuds

COSWORTH Main and Rod Bearings

COMETIC 1.5mm MLS

(I will include a RB26DETT bare block which I purchased just for its crankshaft)

Cyl. Head $3800.00

RB25DET Ported and Polished Cyl. Head

TOMEI PROcams 260 Degree w/10.25mm Lift (Intake)

TOMEI PROcams 260 Degree w/10.25mm Lift (Exhaust)

TOMEI Type B Valve Springs

TOMEI Forged Solid Lifters Conversion

TOMEI Shims

TOMEI Cam Pulleys (In&Ex)

*(I will also include a bare RB26DETT cyl. head, stock pulleys, cam covers, stock valves, springs, retainers and lifters)

Engine Externals $3500.00

RB26DETT Individual Throttles & Plenum

GARRETT GT35R .86 Turbo w/Ported Shroud and Polished Housing (3 months old) (I had to purchase a new turbo to rebuild my turbo. My previous turbo had bearings issue)

TIAL 44mm Wastegate

GREDDY Timing Belt

JUN Oil Pump

HKS Downpipe

SARD 800cc Fuel Injectors

NISMO Fuel Regulator

SARD Thermostat

SARD DENSO Iridium Spark Plugs

Q45 AFM

Greddy Type R Blow Off w/Uprated Springs

WALBRO Fuel Pump

HKS Oil Cooler

HKS Intercooler

BLITZ SUS Power Air Filter

OGURA RACING Twin Plate Clutch

All items are purchased new. If somebody would take the whole lot I would let go everything for $10,000.00 with Power FC and controller. This motor made 444whp at 1.5bar on a DD Dyno. Motor can still be push way more but I would prefer a stable and a healthy motor. Revs at a healthy 9000rpm. I had this motor running for 4-5 months now. Probably made around 2000km on clock including running in. Weekend drives only.

I have other external parts which I am letting go as well.

Exterior

JUN Front Bar

JUN Rear Bar

JUN Side Skirts

JUN Rear Spoiler

TEIN FLEX Coilovers $1400.00

TANABE Strut Tower $250.00

BBS LM Two Piece Forged Wheels 9J x 9.5J $2500.00 with Michelin Pilot Sport 2

MICHELIN Pilot Sport 2 (275/35/18 , 235/40/18)

ENDLESS CCR Brake Pads

ENDLESS Super Street Brake Pads

ENDLESS Brake Rotors

GANADOR Side Mirrors

VARIS Carbon Hood

NISSAN SII Headlamps

Electronics & Interior

APEXi POWER FC w/Hand Controller $1300.00

HKS EVC 6 Boost Controller $500.00

HKS TYPE 1 Turbo Timer $150.00

DEFI Boost Meter

DEFI Oil Pressure Meter

DEFI Oil Temp Meter

DEFI Water Temp Meter

DEFI Exhaust Temp Meter

DEFI Control Unit

*(Whole lot for $1,200.00)

PIONEER AVH-P6650 Indash DVD

KICKER kX650.4 Amplifier

LANZAR VIBE 435 1600W Amplifier

MTX 8000 Subwoofer

JL AUDIO VR600Si Components

BRIDE PROS Leather Full Bucket Seats

MOMO EVO TME Steering

Pls PM me for details. Genuine sale!

Cheers!

Edited by Tomei_Powered
Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/
Share on other sites

PM R33,

I am not sure if I would wanna remove my current headlamps atm. I thought of selling it together with the car.

Sorry mate. Will PM you if I am able to find a used headlamps to swap with my current one.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132402
Share on other sites

Engine comes with all supporting parts to run. Eg. p/s pump, a/c comp, pulleys, tensioners, radiator, etc. I am removing the whole running engine with gearbox and swap with a stock RB25 motor on my car. (I will also include the gearbox if I get a really genuine buyer).

PMs replied. Price is slighty negotiable. I am sure purchasing those parts new and building such a engine requires lotsa time, sweat and headaches. So I think thats the best offer I can do, $10,000.00, swap it into your car and you get instant 450whp.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132430
Share on other sites

Head sounds tasty, any vids of idle?

Can you post a few pics of the bonnet?

The Varis hood is just a stock looking hood. It was full carbon I bought used. It was damaged slighty so I repaired and sprayed it black instead.

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132444
Share on other sites

  • 1 month later...

Spewing I wasted money on a tired built 25 and a standard motor to replace that after it'd f'd up this year...

This offer has come 5months late otherwise I wouldve snapped it all up in a second

free bump and good luck with the sale...

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5194888
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...