Jump to content
SAU Community

R34 Gtr

GTRVS2
 Share

Recommended Posts

GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
Any symptoms? Splutter? Missing?

Had anything in or out?

Tried to clean anything when all of this happened?

Why was it running even at 0.5bar when it should have been 0.8 on a squirt?

changed the oil not long before it happened and the car has always been runnig on 0.5 since i got the car last year.

other than that the car is running good.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5134107
Share on other sites
choyda Veteran

choyda

Posted
Posted

If you are going off the stock MFD, can you tell what it reads as idle?

Have a listen at idle in the engine bay for hissing too. Theres a thin vacuum hose that goes from the rear of the engine to the sensor pickup near the driver side strut tower. Have a feel for leaks.

Mine split ever so slightly near the join. Symptom was almost no vacuum on the boost gauge and had the same issue when giving a slight boot. You would also occassionally see a bit more fuel in your exhaust.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5138199
Share on other sites
GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
If you are going off the stock MFD, can you tell what it reads as idle?

Have a listen at idle in the engine bay for hissing too. Theres a thin vacuum hose that goes from the rear of the engine to the sensor pickup near the driver side strut tower. Have a feel for leaks.

Mine split ever so slightly near the join. Symptom was almost no vacuum on the boost gauge and had the same issue when giving a slight boot. You would also occassionally see a bit more fuel in your exhaust.

hey mate you were right .the pipe going from the rear of the engine to the boost sensor split right behind the engine.thanks a lot for your help.

it is boosting upto 1bar now.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5142223
Share on other sites
GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
One thing that can do it is a collapsed cat. It happened on my last car.

hi mate i checked the cat today and found the exhaust was leaking from both sides, but the cat it self was ok. i changed the gaskets but it ends up it wasent the problem. i found the pipe that goes to the boost sensor was broken from behind the engine. but thanks for all your help.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5142227
Share on other sites
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

sounds like you got it sorted, but for workshops i would highly recommend Status Tuning (soon to be Chequered Tuning) and also of course Race Pace Motorsports if you need the car checked.

Any mods yet? Trent (Status Tuning) can work some real magic if you need something tuned :)

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5146776
Share on other sites
GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
sounds like you got it sorted, but for workshops i would highly recommend Status Tuning (soon to be Chequered Tuning) and also of course Race Pace Motorsports if you need the car checked.

Any mods yet? Trent (Status Tuning) can work some real magic if you need something tuned :cool:

no i havent done anything to the car yet, i whant to pay it of first. wher are those work shops based do you now?

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5146944
Share on other sites
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

south dandenong and bayswater, off the top of my head - Status is deadset easy to get to, very close to EastLink. Don't know about RacePace.

doesn't really matter anyway. If it takes a while to get to a good tuner, it takes a while to get to a good tuner. It is EASILY worth the time/effort to take your car to a place that knows what they're doing.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5147103
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...