Jump to content
SAU Community

Recommended Posts

I am looking into replacing stereo in m35 stagea as factory cd player doesnt work. Chris was good enough to let me know that they are repairable but for $600. I would still have to remove it as i live south of sydney so driving it up to Brisbane for a install is a bit silly. was also toying with the idea of an after market head unit, but have been told the facia plates are $500 because they include some air conditioning module as it has to be broken off in the removal process which doesnt sound right to me. any help or a step by step diss-assembly guide would be much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/312147-m35-stereo-install/
Share on other sites

Here you go...

Here

I think lots of us have the stuff autochanger... It is partly caused by the heads not being "parked" (like on an old hard disc) before the cars are transported to Oz.

Because it is such a pain to get fixed, the iPod install really does seem to be the best solution..

Using one of these...

iPod controller

panel and AC controller are the go to do it correctly. the A/C side of things is PART of the radio panel and as such it's not a moddable (new word -yay!) item. I can take photos (and have done so in the past.) but the question will still come up and I'l still answer it the same way :cool:

as for the parking issue - nup! these things spit gears due to age and heat. common ones are on the laser drive and as such it causes a chain reactiion taking everything in the direct path with it.

doing it cheaply, $320 + frieght will net the IPOD lead from me and you can tear the dash down in 20 or so minutes plug it in and you are done. if you have the controls on the wheel then the ipod will drive from there as well.

your call.

this sounds great, but the pulling down of the dash is what im concerned about.

OK, i know see that the issue is replacing the top facia, which is not an issue when leaving the std deck. Thanks heaps.

panel and AC controller are the go to do it correctly. the A/C side of things is PART of the radio panel and as such it's not a moddable (new word -yay!) item. I can take photos (and have done so in the past.) but the question will still come up and I'l still answer it the same way :cool:

as for the parking issue - nup! these things spit gears due to age and heat. common ones are on the laser drive and as such it causes a chain reactiion taking everything in the direct path with it.

doing it cheaply, $320 + frieght will net the IPOD lead from me and you can tear the dash down in 20 or so minutes plug it in and you are done. if you have the controls on the wheel then the ipod will drive from there as well.

your call.

as for the parking issue - nup! these things spit gears due to age and heat. common ones are on the laser drive and as such it causes a chain reactiion taking everything in the direct path with it.

I only said part of the reason... :blush:

These cars may given a good bounce around on their journey to Oz, much more so than the domestic sea journey between the Japanese islands.. Surely that might make some contribution to a weak head drive finally collapsing.. I had been told that this was why the CD/DVD heads are parked on the audios as part of the global industry leaving the factory check list...

So are these Nissan/Bose units worse than any other brand? Was it a fundimental design flaw? As the other parts of the units, radio, tape (yes I did use it once I found the stuffed CD) external CD changers etc. seem to work quite well.

And as for pulling down the dash... It really isn't so hard, once you read through that stuff on the G35.. Also gives you a chance to correct the "tiptronic" shift direction when you have the centre console out. :yes:

Edited by nickcorr
this sounds great, but the pulling down of the dash is what im concerned about.

OK, i know see that the issue is replacing the top facia, which is not an issue when leaving the std deck. Thanks heaps.

so you follow now. its not that bad.

do you want me to send you a lead?. can have one there thurs morn :blush:

I only said part of the reason... :blush:

These cars may given a good bounce around on their journey to Oz, much more so than the domestic sea journey between the Japanese islands.. Surely that might make some contribution to a weak head drive finally collapsing.. I had been told that this was why the CD/DVD heads are parked on the audios as part of the global industry leaving the factory check list...

true on NEW units. these things are at least 6 yrs old (they swapped the decks in 2004 and again in 2005.) before you get them. given most of these are 2001-2003 versions they are well and truly on the way out. the laser alone is not meant to live past 5 yrs.

So are these Nissan/Bose units worse than any other brand? Was it a fundimental design flaw? As the other parts of the units, radio, tape (yes I did use it once I found the stuffed CD) external CD changers etc. seem to work quite well.

they are FULL of flaws. there are design flaws in the PSU section for one. I dare say thats why nissan changed them late 2003 and again in nov 04. 3 units and 3 different mechs. the middle unit runs the same mech as a PN2541 (350Z radio) and that one suffers flaws as well. (electrical- they changed the design a LOT in those so they do not self destruct.) the 3rd revison they appeared to fix the electrical issue in them and a minor mechanical change from what I can see.

And as for pulling down the dash... It really isn't so hard, once you read through that stuff on the G35.. Also gives you a chance to correct the "tiptronic" shift direction when you have the centre console out. :yes:

correct. though the shifter is a matter of prefernce.

now that i know whats involved i can tell the boss what the go is, as its her car, but id say she will be keen.

i know the shifter works in reverse to most cars but i like it.

true on NEW units. these things are at least 6 yrs old (they swapped the decks in 2004 and again in 2005.) before you get them. given most of these are 2001-2003 versions they are well and truly on the way out. the laser alone is not meant to live past 5 yrs.

they are FULL of flaws. there are design flaws in the PSU section for one. I dare say thats why nissan changed them late 2003 and again in nov 04. 3 units and 3 different mechs. the middle unit runs the same mech as a PN2541 (350Z radio) and that one suffers flaws as well. (electrical- they changed the design a LOT in those so they do not self destruct.) the 3rd revison they appeared to fix the electrical issue in them and a minor mechanical change from what I can see.

correct. though the shifter is a matter of prefernce.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...