Jump to content
SAU Community

Recommended Posts

There are different kinds of semi-slicks, there are the ultra high performance / street/track semi-slicks (not R compound) for example Khumo KU36 and Federal 595RSR.

And then there are R-compound semi-slicks which are mostly road legal too assuming they have appropriate levels of depth :D

Maybe you could ask a more specific question?

i was looking into something like the falken FK 452 or the Dunlop SP SPORT MAXX TT or maybe the Dunlop SP SPORT MAXX GT.i always throught that Semi Slicks were illegal on the street .im not to worryied about K's - i do about 5k a year if that .

if i were to buy a Semi Slick i was thinking either the falken RT 615 or TOYO R888 Direzza - D03G or Potenza - RE55S or Potenza - RE-11S - i havent had much time to reseach a Semi Slick due to the fact i thought they were illgearl so i didnt bother.

im looking at 235/40/18 or the front and a 265/35/18 on the back - i hate 18X8.5 wheels on the front and 18 X9.5 on the back

quick question- are Semi Slicks legal on the road in vic

As long as they have the appropriate markings (DOT and/or E4) and they're above minimum tread depth they're street legal. When it's wet and cold they can also be f**king scary.

R888s, RE55S and D03Gs are in a different league to RT615s and RE-11s. The latter are more aggressive street tyres than a proper motorsport tyre.

Are you going to be using them mainly for street or track?

If mainly street then S spec is probably best: Falk RT-615 though they're a bit old hat, so i'm going to try Kumho KU36s or Fed RSRs as they seem to be the preferred options these days. KU36s are cheap, RSRs grip better.

If mainly track then R spec is probably best: R888s, RE55S and D03G etc

But it also comes down to personal taste.

AFAIK

S spec = longer life, better wet grip, more comfortable

R spec = better dry grip

  • 2 weeks later...

I have been informed by Bridgestone Motorsport here in SA that the RE55s are not DOT approved and therefore are not street-legal (for track use though I loved the set I had).

The Advan A048s are another semi that are DOT approved. I've done one trackday on mine and they're good so far (should be: they are the control tyre for the V8 Utes and aussie racecar categories).

I'd be very surprised if they are correct about Re55 being not being legal for street use. They have been around for about 5 years and used extensively on the road by track people in that time. Also, CAMS define non slick tyres like "semi slicks" as being "DOT approved", and re55s are on that list.

I have been informed by Bridgestone Motorsport here in SA that the RE55s are not DOT approved and therefore are not street-legal

They must have changed it since I got them a few years back, since mine were DOT and E4 approved.

The Advan A048s are another semi that are DOT approved. I've done one trackday on mine and they're good so far (should be: they are the control tyre for the V8 Utes and aussie racecar categories).

Control tyre actually means "cheap". It doesn't necessarily mean "good".

I didn't like the A048s I've driven on. They are cheaper than RE55S, which is a plus, but if I was chasing dollars I'd have to see how they price up against R888s. The A050s are meant to be better, but the only comments I've seen on them have been marketing fluff from Yokohama.

They must have changed it since I got them a few years back, since mine were DOT and E4 approved.

Control tyre actually means "cheap". It doesn't necessarily mean "good".

I didn't like the A048s I've driven on. They are cheaper than RE55S, which is a plus, but if I was chasing dollars I'd have to see how they price up against R888s. The A050s are meant to be better, but the only comments I've seen on them have been marketing fluff from Yokohama.

Yeah I had RE55s fitted two years ago to my street&track S15 by the previous owner of the same store, no dramas. Without bagging the guy too much, whether he was right about the RE55s or not he proceeded to recommend the RE11 (*not* the RE11S) as a comparable tyre to the RE55 (which it's not) and then said he would definitely help me out to get on the track by the following week, but never rang me back. I needed tyres as my old Re001s were toast, hence the A048s.

Totally agree re RE55 legality and CAMS approval, however there seems to be lots of waffle on the interwebs about how they are not legal. Regardless the magill dealer is the sole SA dealer and refused to fit them so didn't have other options other then rocking up with 4 "spare" rims in the boot.

Re the A048 performance, when I said I was happy I was being very generous. the only session I've done so far on them I was very disappointed in grip levels (couldn't find any all day), but didn't want to badmouth the tires until I've made sure it's not

  • the way I'm driving on them
  • the pressures I'm running
  • the fact I was also trying to get used to new turbos (going from 205kw to 285kw)

After this Monday I should have a better idea.

So if you can get RE55s onto your car and you can afford them :thumbsup: I would say do it.

also an 80rwkw jump will DRASTICALLY affect your perception of grip...

with only 200rwkw in an R you could plant your foot through the firewall on bob jane allrounders and still find traction

also an 80rwkw jump will DRASTICALLY affect your perception of grip...

with only 200rwkw in an R you could plant your foot through the firewall on bob jane allrounders and still find traction

agreed, hence giving the tyres the benefit of the doubt! :P I expected much better lap times though and am yet to be satisfied - practice will help

Mallala times:

R32 GTR, RE001 street tyres, 205rwkw: 1:24.6

R32 GTR, A048 semis, 285rwkw: 1:23.7

Still chasing my S15 PB though :P (S15, RE55s, 163rwkw, 1:23.05)

Hopefully it doesn't rain on Monday so I can put in some good practice times...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...