Jump to content
SAU Community

Recommended Posts

There are different kinds of semi-slicks, there are the ultra high performance / street/track semi-slicks (not R compound) for example Khumo KU36 and Federal 595RSR.

And then there are R-compound semi-slicks which are mostly road legal too assuming they have appropriate levels of depth :D

Maybe you could ask a more specific question?

i was looking into something like the falken FK 452 or the Dunlop SP SPORT MAXX TT or maybe the Dunlop SP SPORT MAXX GT.i always throught that Semi Slicks were illegal on the street .im not to worryied about K's - i do about 5k a year if that .

if i were to buy a Semi Slick i was thinking either the falken RT 615 or TOYO R888 Direzza - D03G or Potenza - RE55S or Potenza - RE-11S - i havent had much time to reseach a Semi Slick due to the fact i thought they were illgearl so i didnt bother.

im looking at 235/40/18 or the front and a 265/35/18 on the back - i hate 18X8.5 wheels on the front and 18 X9.5 on the back

quick question- are Semi Slicks legal on the road in vic

As long as they have the appropriate markings (DOT and/or E4) and they're above minimum tread depth they're street legal. When it's wet and cold they can also be f**king scary.

R888s, RE55S and D03Gs are in a different league to RT615s and RE-11s. The latter are more aggressive street tyres than a proper motorsport tyre.

Are you going to be using them mainly for street or track?

If mainly street then S spec is probably best: Falk RT-615 though they're a bit old hat, so i'm going to try Kumho KU36s or Fed RSRs as they seem to be the preferred options these days. KU36s are cheap, RSRs grip better.

If mainly track then R spec is probably best: R888s, RE55S and D03G etc

But it also comes down to personal taste.

AFAIK

S spec = longer life, better wet grip, more comfortable

R spec = better dry grip

  • 2 weeks later...

I have been informed by Bridgestone Motorsport here in SA that the RE55s are not DOT approved and therefore are not street-legal (for track use though I loved the set I had).

The Advan A048s are another semi that are DOT approved. I've done one trackday on mine and they're good so far (should be: they are the control tyre for the V8 Utes and aussie racecar categories).

I'd be very surprised if they are correct about Re55 being not being legal for street use. They have been around for about 5 years and used extensively on the road by track people in that time. Also, CAMS define non slick tyres like "semi slicks" as being "DOT approved", and re55s are on that list.

I have been informed by Bridgestone Motorsport here in SA that the RE55s are not DOT approved and therefore are not street-legal

They must have changed it since I got them a few years back, since mine were DOT and E4 approved.

The Advan A048s are another semi that are DOT approved. I've done one trackday on mine and they're good so far (should be: they are the control tyre for the V8 Utes and aussie racecar categories).

Control tyre actually means "cheap". It doesn't necessarily mean "good".

I didn't like the A048s I've driven on. They are cheaper than RE55S, which is a plus, but if I was chasing dollars I'd have to see how they price up against R888s. The A050s are meant to be better, but the only comments I've seen on them have been marketing fluff from Yokohama.

They must have changed it since I got them a few years back, since mine were DOT and E4 approved.

Control tyre actually means "cheap". It doesn't necessarily mean "good".

I didn't like the A048s I've driven on. They are cheaper than RE55S, which is a plus, but if I was chasing dollars I'd have to see how they price up against R888s. The A050s are meant to be better, but the only comments I've seen on them have been marketing fluff from Yokohama.

Yeah I had RE55s fitted two years ago to my street&track S15 by the previous owner of the same store, no dramas. Without bagging the guy too much, whether he was right about the RE55s or not he proceeded to recommend the RE11 (*not* the RE11S) as a comparable tyre to the RE55 (which it's not) and then said he would definitely help me out to get on the track by the following week, but never rang me back. I needed tyres as my old Re001s were toast, hence the A048s.

Totally agree re RE55 legality and CAMS approval, however there seems to be lots of waffle on the interwebs about how they are not legal. Regardless the magill dealer is the sole SA dealer and refused to fit them so didn't have other options other then rocking up with 4 "spare" rims in the boot.

Re the A048 performance, when I said I was happy I was being very generous. the only session I've done so far on them I was very disappointed in grip levels (couldn't find any all day), but didn't want to badmouth the tires until I've made sure it's not

  • the way I'm driving on them
  • the pressures I'm running
  • the fact I was also trying to get used to new turbos (going from 205kw to 285kw)

After this Monday I should have a better idea.

So if you can get RE55s onto your car and you can afford them :thumbsup: I would say do it.

also an 80rwkw jump will DRASTICALLY affect your perception of grip...

with only 200rwkw in an R you could plant your foot through the firewall on bob jane allrounders and still find traction

also an 80rwkw jump will DRASTICALLY affect your perception of grip...

with only 200rwkw in an R you could plant your foot through the firewall on bob jane allrounders and still find traction

agreed, hence giving the tyres the benefit of the doubt! :P I expected much better lap times though and am yet to be satisfied - practice will help

Mallala times:

R32 GTR, RE001 street tyres, 205rwkw: 1:24.6

R32 GTR, A048 semis, 285rwkw: 1:23.7

Still chasing my S15 PB though :P (S15, RE55s, 163rwkw, 1:23.05)

Hopefully it doesn't rain on Monday so I can put in some good practice times...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...