Jump to content
SAU Community

Recommended Posts

Your right, they use numbers for blocks, zones and areas.

For example, my address is: Motoyama Nishimachi "2-2-7-501" Higashinada-ku Kobe.

The "2-2-7-501" equals: Block #2, Building/House #2-7, Apartment #501 (I live in a 7 story building).

There ya go! It makes sense IMO...

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631716
Share on other sites

In some ways the system does make sense - well, the Japanese postmen (and women) don't seem to have any problems

BUT it seems that in a lot of cases block 6 is nowhere near block 5...

or in my case, I live in house 2640, which is next to 2604 which is next to 2582 I believe! :rofl:

But I do live out in the countryside!

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631781
Share on other sites

I should add that around where I live you can find little street side maps. They give you details of all the buildings in the area and their numbers, and in most cases the owners/residents surname. Makes finding a house somewhat easier! :rofl:

And most of the major roads do have names/numbers, such as Yamanote Dori, or Route 20, or Bypass...

It's not too bad when you get used to it.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631793
Share on other sites

So the equivelent of our Hwy's and FWY's do have names(or route numbers) and when in prefectures it's the number system you mentioned?

I guess once you are use to it it would be handy you could look at the numbers and tell in what general direction you have to head

(assuming there is an order to the number system.. :rofl:

cheers for the Info guys.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631930
Share on other sites

I think America has the best Street Naming system, its just numbers.

1st Street

2nd Street

3rd Street

Makes things very easy if you want to get to 22nd street you just keeeeeep driving. I never got lost when I was walking around, but then again thats coz I didn't venture out too far coz I forgot to take my pistol :rofl:

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-631974
Share on other sites

Hi, this is kinda off the topic, but I have heard its really expencive to live in Japan, like everything costs alot of AUD. Is this true? Or was it the case, but now its fine?

I'm sure this was touched on before, on one of the other threads. Can't find it now though, probably a victim of The Great Lost Month...:(

But basically:

BIG CITY = Very Expensive :)

LITTLE CITY = Expensive :(

IN THE MOUNTAINS = Cheap :)

the biggest outlay in Japan is rent. Costs your more in the city. Having said that, I have no idea how that compares to Aus. How much would you pay for a small apartment in Sydney for example?

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632356
Share on other sites

FCUK!

Then you're gonna have a shock living in Tokyo! According to an online currency calculator 420 bucks AUS is around 35,000 yen! Shit, my mate who lives in the small city near me pays 40,000 yen for a 1 room apartment!!! In tokyo expect to pay around 50,000 to 80,000 yen a month for a similar sized (1 room with dining/kitchen bathroom) and that won't include parking!

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632406
Share on other sites

Rezz will know more about the costs of rent in big cities, but basically it's looking like Japan is VERY expensive compared to Aus. Don't forget before you can move in you often have to pay several months in advance, plus a months rent as fee to the housing agency, plus another month's as "Key Money" - a mandatory monetary gift to the land owner...:(

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632410
Share on other sites

In tokyo expect to pay around 50,000 to 80,000 yen a month for a similar sized (1 room with dining/kitchen bathroom) and that won't include parking!

80,000yen = A$979/mth

If you ask me $244/wk ($979/mth) is pretty damn cheap to live in Tokyo City.

To get rent down to $244/wk in Sydney you would have to go 45mins west (:() and that would get you a 4 bedroom house with double lockup garage and small-med backyard.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632422
Share on other sites

It certainly seems expensive, but I'm always converting things to British, and rents over there, even in London, aren't too bad! :(

It's certainly a lot cheaper to live outside the main cities. You also have to factor in parking costs - I believe Rezz pays around 15,000 yen a month whereas I don't pay anything living out in the countryside as I do.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632429
Share on other sites

Yes guys, shock horror... I pay 120,000 yen a month for a 3 bedroom, 1 bathroom apartment in the area east of Kobe near a really expensive place called Ashiya. In 2003, Settsu-Motoyama (my area) was voted "fastest growing urban zone", meaning it's a combo of the nicest, cleanest, most convenient areas in Japan... hence the price.

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632678
Share on other sites

I dig your sig, Dave... :)

Thanks mate! :)

Geez - 120,000 yen a month! Still I bet it's cool to live in a nice area. Don't get me wrong, there's nothing bad about being in the countryside but my youngest neighbour is way past retirement and I'm surrounded on all sides by old farm houses and even the odd mud brick house! :D Not to mention there's virtually no nite life...:(

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-632773
Share on other sites

hehehe. It aint all bad :D

What the Japanese term countryside is actually quite "urbanised" in my book. But, where I am now, it's about a 5 min drive into the mountains. Moutain roads means drfit action, especially on the weekends. They also mean very few traffic signals (in the cities you've got to put up with traffic jams and signals every 100m or so, something that really makes driving in the city a pain in the ass:()

in my spare time I often take a 5 min drive to my local racing circuit in the mountains and watch the racing/drift action :P

SLY_4.JPG

SLY_3.JPG

for me Tokyo is around an hour away by car, as is Mt. Fuji, Fuji Speedway, Yokohama and nagano for skiing...

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-634806
Share on other sites

the above photos are taken from my site. The circuit itself is growing, but it's essentially a RWYB circuit so you can see just about anything on the track, bikes and hondas included...:P

As a side note, thus far the fastest car I can recall seeing around the track was a seriously worked Subaru...FORESTER! :D

they also have a cool RC track aswell...

Link to comment
https://www.sau.com.au/forums/topic/31278-jap-streets/#findComment-634811
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...