Jump to content
SAU Community

Recommended Posts

This is f**king hot...

I guess that front bar's pretty rare?

that is hot but is not a masasports one might be custom

WTF dude? We know its not a masasports one...Its Nismo!

are you talking about the front bar or bonnet , so you reckon thats a nismo bonnet then ?

im talking about the bonnet

if so please post a link to that bonnet on a nismo site .......

At no point did you mention the bonnet when you were lamenting about how hot it looks, Dust.

So again, just to summarise for yourself (As everyone else is alreayd on the same page)

Front bar = Nismo

Bonnet = Masasports

Bonnet MAY be the now defunct Dolphin item.

I have emailed RHD for a clear picture of the NM35 and PM35 Masa bonnet and will post here if I receive said pic.

I assumed the Masa image on RHD was a stock image; they say they stock bonnets for a bunch of models - so I figured the venting pattern may well be different for the Stag compared ot the image.

Now that you mention Dolphin, I do recall seeing one on their site - but yeah, that was discontinued yeaaaaaars ago :(

I assumed the Masa image on RHD was a stock image; they say they stock bonnets for a bunch of models - so I figured the venting pattern may well be different for the Stag compared ot the image.

Now that you mention Dolphin, I do recall seeing one on their site - but yeah, that was discontinued yeaaaaaars ago :(

Yep same, which is why I requested a picture of the NM and PM bonnets.

The rims are 19x8.5 +22 Enkie GTC01

But thats too skinny, I ordered them online before anyone had done any real experimenting and wanted to be safe. We have worked out with my brothers M35 that 9.5 +35/30 is the ideal fitment - no scrubbing and no rolling necessary.

Although if I were to do it all again I would probably to a little flair/roll and run 9.5 +22

Its only the fronts that are an issue, you can easily fit 11" on the back! haha

What rubber did you end up getting?

I'm ordering wheels, same specs as yours (different brand). Thinking a 235/40-19 would fit the best. Thoughts?

What rubber did you end up getting?

I'm ordering wheels, same specs as yours (different brand). Thinking a 235/40-19 would fit the best. Thoughts?

Check http://www.1010tires.com/TireSizeCalculator.asp

235 is a rare width I think.

245 is more common.

yeah 225 and 245 are more common. I remember the Tyre guy telling me that the only car they can think of with 235 was the M3 so there arent any cheap options.

245 looks a bit big on 8.5J

Here is another pic of the tyre and fitment.

_MG_7823.jpg

_MG_7824.jpg

At no point did you mention the bonnet when you were lamenting about how hot it looks, Dust.

So again, just to summarise for yourself (As everyone else is alreayd on the same page)

Front bar = Nismo

Bonnet = Masasports

ye but bonnet = masasport isnt on there website they just have the twin vented bonnet

yeah 225 and 245 are more common. I remember the Tyre guy telling me that the only car they can think of with 235 was the M3 so there arent any cheap options.

245 looks a bit big on 8.5J

Here is another pic of the tyre and fitment.

_MG_7823.jpg

_MG_7824.jpg

the blue stag seems to be a rare colour compared to all the other colours they come in

mine is identicle colour and body style as this but with a nice wing and nsimo wedin i think its called exhaust

also undecided to black the headlights out

as the black loks awsome on the stagea expecially on the silver or white cars

yet with the blue colour im not sure as you need oposing colours light and dark so darker car means maybe keep silver lights to macth grill , still not sure

Bonnet MAY be the now defunct Dolphin item.

I have emailed RHD for a clear picture of the NM35 and PM35 Masa bonnet and will post here if I receive said pic.

Cam - you are correct. Bonnet is a very rare Freeway - Dolphin item. If anyone finds one - i'll take it!!

http://www.freeway-dolphin.co.jp/aeroform/stagea/nissan_stagea_m35st.htm

Scroll down and there is a small picture of it.

ye but bonnet = masasport isnt on there website they just have the twin vented bonnet

As above. Bonnet is Dolphin...

Ive watched YAJ for over a year now; havent seen one come up yet.. and I'll be bidding on it rather than palming it off sorry mate :P

Might make some enquiries... :whistling: Would hate to start a bdding war when one comes up....

Love the Dolphin stuff!!

Presuming this thread is simply a gallery of M35's

Was sent these by a friend in Japan.

SLAMMED!!!!! >_<

post-12229-0-37119600-1303254966_thumb.jpg

post-12229-0-71615100-1303254982_thumb.jpg

how are these guys running different widths?

I thought everything goes to shit for the 4wd.

how are these guys running different widths?

I thought everything goes to shit for the 4wd.

What makes you think that its an NM35? Doesn't look like the guy was really after performance over stance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...