Jump to content
SAU Community

Recommended Posts

Hiya guys i got a bit of a problem....

When i turn on my car or if my cars on and i turn on my climate control, there is a slight knocking sound coming from behind the unit inside the dash. This lasts maybe 10-15 seconds but everything seems to be working fine!!

Any1 else had this problem or know what it might be?

Cheers

:)

had the same sound as well. i suspect that it could be the internal vent opening up to allow air in. i usually circulate the air inside the car when the A/C is on but when i turn it off, i noticed wind still blowing in when the car is moving and i realised that the vent has opened up to allow gushing air.

may or may not be...

yeah, there are two relays (motors) which slide open the vents in the heater unit to control between the aircon and heater to give your xx degrees. If one is slightly dodgy, it may make that ticking noise - its like "slipping" on its catch.

Its no biggy, most skylines seem to do it to some extent. It doesn't worry me..

see this:

http://www.skylinesaustralia.com/forums/at...tachmentid=9971

This is the problem.. that black thing ontop is one of the relays (there is another on the side of that box) that slides back and forward to open the vents in there. If its slightly stuffed it will "click" when operating.

I have this problem too! i fkn hate it. first i tried punching the **** outa the dash, obviously didnt work. What is the parts name that i need to replace??????????????????/

im fkn sick of it, if any1 knows, tell me so i can replace it. or if any1 has it. URGENT, AS I NEED TO SELL MY CAR AND CANT!!

THANKS

you could buy my heater box for $40.. it has the relays on it. Then you'll have to pay somebody to pull apart your entire dash to the firewall (or do it yourself) and replace these components, which is about a 6 hour job.

you still want to fix it?

Hello predetor. Yes i do wona fix, i fkn hate that sound and sick of punching the **** out of the dash hoping it stops. OK so you have this part called the 'heater box', if you are mega positive that the noise will stop, then yes I will definetly buy it. How big is the part and how much is shipping, as I am located in melbourne, I am going to get it installed for free from my mechanic, so not a problem.

I got the same prob too...

The way I stop it (temporarily) is push the ^ button once (to turn temp up) then the v button a few times (to turn temp down)

you can do this with the unit on or off doesn't matter, and it stops it for a little while...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...