Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

we have a japanese version of the manual in paper format. hence the delay.

if you rekon you can get one on yahoo faster than i can be bothered scanning it, then by all means go for it!

ive only ever seen two on yahoo, and i now own one of them ;)

well done Scott!

Don't worry to much about the gearbox shift mate.....manual valve body with paddle shift is the way to go!!!

anyone want to buy a Haltech!!! ;)

I could put the Haltech on my mower I guess, it doesn't get above 6 grand revs. :devil:

I thought a gtr box was the way to go mate? Then it was the pathfinder. When are you going to upgrade?

Just got back from a nice run, the auto is shifting instantly now as there is no throttle closing between shifts. It actually chirps gears now.

Just got back from a nice run, the auto is shifting instantly now as there is no throttle closing between shifts. It actually chirps gears now.

Watch out for those hoon laws Scottie, don't want them saying you were doing a burn out........ all 4.....lol ( ;) )

we have a japanese version of the manual in paper format. hence the delay.

if you rekon you can get one on yahoo faster than i can be bothered scanning it, then by all means go for it!

ive only ever seen two on yahoo, and i now own one of them >_<

Ah yer sweet, i got a scanner here at work that does manual feed into pdf :D

but you have to pull the book apart obviously..

i was just wondering about the Attesa/4wd system and more so its similarities with the gtr and whether i can throw my spare controller onto it..

Glad the Throttle has worked without troubles Scotty!

Wiring? Just wack the throttle in and toss the electronic one over the right shoulder.

I dont even run the tps anymore, you will need the Greddy map sensor though.

Roadtrip? >_<

Looks like Cihan will be busy. He wont let me hand the map around unfortunately either, too much of our time and money invested. Looks like you will have to drive down mate.

Perhaps you can convoy down with Craig? :D

i have all the required parts. except for the throttle body that is lol

is there no way of connecting a TPS to talk to the gearbox input? or is the kickback a single signal from the ECU? the emanage might be able to manage that................

also, whats your cruising like? does the torque converter lockup still work properly?

No idea (yet) if the auto computer has a separate input but if you use the ecu to do it, with a new tps, it will dump more fuel and defeat the purpose of going standalone.

Manual control of the gearbox would be good, with lockup in manual and no lockup in drive perhaps, or just full manualised, piss off the gearstick and run paddle.

6 speed manual even better, thats what I want eventually. I need a clutch pedal.

scott how do i make mine shift quicker????????????

Shift kit will fix most of the issue. The rest is throttle dependent, either chip the ecu or wait till I sort out the cable throttle teething problems.

Anything you change from factory setting will detrimentally affect the cold start and smooth driving of the stock ecu map.

Doesn't look like it, the water temp isn't hooked up to the Emanage.

Another issue I found today, the variable valve timing isn't working. :cool: Anyone know how the Vmanage works?

I may be refitting the elec. throttle, I want my midrange back.

read the manual. its in there, not all THAT difficult AFAIK as it uses RPM to activate the solenoid. so you might be able to activate it later or earlier to make the car run better

It looks like the Vmanage will work, should pep up the throttle response.

I have a really lumpy idle and no surge in the midrange like before so I guess its only running on the high lift profile?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...