Jump to content
SAU Community

Recommended Posts

Remembering that all my mods need to cost me almost nothing to stay within the spirit of the racing.

Is there such a thing as easy brake conversions? I was hoping that I could just swap over R31 Skyline stuff, but it doesn't appear that way.

I thought that the rear caliper mounts were bolted on, but they appear welded to me... mostly I wanted bigger rear brakes, as overheating isn't the issue for the short tests I do (1 -2 minutes each test)... I just need bigger rears to get the back out coming into the corners...

Also, rear caliper rebuild kits seem to be $75 each as cheap as I can get them. Is there a cheaper kit anyone knows of?

Cheers,

Daewoo

Link to comment
https://www.sau.com.au/forums/topic/313814-mr30-easy-brake-conversions/
Share on other sites

one option is to use 2 sets of calipers on each side, a bit complex though

second option is

hydraulic handbrake setup for the rears will get the back end swingin! disk rear only of course!

Garage7 in Adelaide make them to suit . about $300 and VERY strong

http://www.garage7.com.au/ but the web page is down

Address:

Unit 2

33 Light Crescent

Mount Barker

SA 5251

Phone:

Workshop (08) 8398 3107

Declan 0421 878 818

Luciano 0433 767 447

Web:

www.garage7.com.au

[email protected]

or by PM

Cheers,

Declan

Find a wrecked out dr30?? I sold one with complete suspension and brakes for $50 once

Are DR30 brakes bigger??? Bigger rotors or bigger pad area?

Front brakes are easy.

Use modified VT Dunnydore, cost all up about $100.00 2nd hand, or Hilux 4 spots and maybe Z32 rotors.

D

Interested Dennis, I might get the details from you later... ATM I am trying to get the rears working better.

one option is to use 2 sets of calipers on each side, a bit complex though

second option is

hydraulic handbrake setup for the rears will get the back end swingin! disk rear only of course!

Cheers,

Declan

I've got a hydraulic handbrake... got a cheapie of eBay and changed the cyclinder to a better sized one I had in the shed... but the pad area at the rear just isn't big enough to overcome the locked diff and auto transmission... figure I just need a calliper with more pad area... and increase in rotor size would be a bonus... looks like I'll have to hit the wreckers with my trusty verniers...

Is it normal for the rear calliper mount to be welded to the swing arm???

Cheers,

Darryl

Are DR30 brakes bigger??? Bigger rotors or bigger pad area?

Yes! DR30 rear rotors are 290mm as opposed to 250mm in the MR, but the pad area is about the same. They rely more on the leverage of the 145mm radius and the difference in the mounts is all on the caliper leg.

Is it normal for the rear calliper mount to be welded to the swing arm???

Yes, normally. The only bolt on rear caliper mount I have seen in recent times for a Nissan is the N12 ET Turbo Pulsar and they are extremely hard to find.

Cheers, D

Cheers,

Darryl

Yes, normally. The only bolt on rear caliper mount I have seen in recent times for a Nissan is the N12 ET Turbo Pulsar and they are extremely hard to find.

N15 Pulsar are bolt on... as are R31 skyline... I unbolted the drums off the back of my N15, and bolted on R31 Skyline rears and they lined up perfectly... pretty sure the rear disks are a bolt on an the N15 Series II and SSS, but can't say 100%...

Cheers,

Darryl

N15 Pulsar are bolt on... as are R31 skyline... I unbolted the drums off the back of my N15, and bolted on R31 Skyline rears and they lined up perfectly... pretty sure the rear disks are a bolt on an the N15 Series II and SSS, but can't say 100%...

Cheers,

Darryl

D,

Just checked,

I still have the caliper brakets that bolt to the rear axle of an N15 Pulsar. I still had the brakets, but unfortunately have thrown away the full set of Pulsar SSS Brakes... that is what you did before eBay when you couldn't sell your crap to other idiots...

The bolt spacing for the N15 rear calipers is the same as the MR30 rears. Don't know what the rotor offets are, but might be worth some investigation... once you know the standard SSS Pulsar ones fit, then you can look at what Pulsar guys do as rear conversions...

Just thinking...

Cheers,

Darryl

Are DR30 brakes bigger??? Bigger rotors or bigger pad area?

In addition to what Dennis (correctly) said, the piston is 10mm (IIRC) larger - ~45mm vs. ~35mm.

You will also find these brakes on the rear of a Z31 300ZX.

Is it normal for the rear calliper mount to be welded to the swing arm???

The 1982 R30 Skyline came with rear drums. You can remove the drums and make your own rear caliper mounts, utilising the original drum mount bolt holes. Just the same way as people mount discs to the rear of a 1600/180B/240K etc.

The only problem is finding those trailing arms, and then finding a spare pair... :cool:

ive used hr31 rear Aarms in my c210 coupe project with r33 turbo calipers/rotors and started 2day fitting hr31 Aarms to my dr30 which will run r33 gtr brembo calipers/rotors allround with the 1 1/16 gtr master cylinder. hr31 uses internal handbrake and later model brakes go on with little fuss.

jon.

The only problem is finding those trailing arms, and then finding a spare pair... :blink:

You mean like the ones that were on the back of the sedan I sent to the scrappers a few months ago :) :) :)

I didn't realise that the Sedatch ones were welded until I got them apart...

At the moment I will persist with the standard brakes, it was really only to try and get the hydraulic handbrake to work better...

Anyone ever rebuilt the standard rear calipers??? I mean all the way to getting the handbrake mechanism out and back in again... I am never doing that again, what a pain in the @rse... you need six hands and exray vision... and after all that, it seems the problem with the (standard) handbrake sticking is probably a shitty cable anyway... :verymad: :verymad: :verymad

Thanks for all the replies...

started 2day fitting hr31 Aarms to my dr30 which will run r33 gtr brembo calipers/rotors allround with the 1 1/16 gtr master cylinder. hr31 uses internal handbrake and later model brakes go on with little fuss.

jon.

Why on earth would you want this amount of braking power on an DR30?

You planning entering this car in Le Mans or something???

The DR I'm building will have stock DR rears, 10" DR booster, DR 1" m/cyl & BNR32 GTR fronts and I'm sure I will easily pull it up from 220~240kph.

Sounds like a lot a fart arsing about for next to no real benefit.

Wouldn't your time & effort be better utilised making the car handle & steer better?????

What size wheels and tyres do you plan using with this brake set up?????????

D

easy brake conversion if u have hr31 Arms which can be had cheaply enough if u find 1 wrecking...

Y? because i can and got all the stuff at a good price so y not.

lemans? not at this stage.

yours sounds like a good upgrade but i wanted to upgrade the rears aswell.

next to no benifit? bigger are better are they not?

time wasted? its taken me 2days at the most and im also doing suspension/steering upgrades

wheels are work vs 18x8 & 9s 5stud > z31 hubs

ive wrecked out a few passages so had these hr31 Aarms sitting around and they mount quite easily to r30 crossmembers, the 4bolt turbo half shafts are an upgrade if your running an r200 and the stock hr31 turbo rear rotors are ventilated and of a good size but use a slide caliper. brakes can easily be upgraded for r32 onward twin piston setups by having the rotor redrilled ( if staying 4 stud ) and the caliper spaced 1.5mm with a hardened washer... not hard at all???

jon.

Why on earth would you want this amount of braking power on an DR30?

You planning entering this car in Le Mans or something???

The DR I'm building will have stock DR rears, 10" DR booster, DR 1" m/cyl & BNR32 GTR fronts and I'm sure I will easily pull it up from 220~240kph.

Sounds like a lot a fart arsing about for next to no real benefit.

Wouldn't your time & effort be better utilised making the car handle & steer better?????

What size wheels and tyres do you plan using with this brake set up?????????

D

because it will be turbo, and who says he isnt doing handling stuff? lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...