Jump to content
SAU Community

Recommended Posts

yo peeps

my mates RB25 (s2) is all of a sudden making a funny noise kinda sounds like a bearing

it was fine like a week ago, hasnt been driven.. now all of a sudden this noise

tried unplugging vvt but that didnt fix it, it feels like its coming from under the rocker cover

the engine is stock, unopened etc

<object width="480" height="385"><param name="movie" value="<A href='

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="<A href="
type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Link to comment
https://www.sau.com.au/forums/topic/314501-rb25-making-funny-bearing-noise/
Share on other sites

take it to a mech. asap! i wish i had gone to see one earlier. i started hearing a similar noise, took it to my mech, turns out harmonic balancer had come loose... left it too long and had damaged my crank :D

hopefully this isnt your problem.

-trel

This is screwed... i have just changed the spark plugs... but i took it for a few drives and it never made any noise..

Then a couple days before i moved overseas i started the engine and it was fine no noises at all..... so i dno how a noise like that could suddenly come up?

worst of all is i now like in U.A.E and im trying to get rid of the car soon as possible.....

Could be valve guides in the head. :worship:

i dont see how the valve guides could make that noise?... i dont think its the valves themselves because i bent valves and it make a different sound to that..... so i dont think its bent valves.

if valve guide were stuffed... then oil would be getting into the cylinders and there would be smoke coming out the exhaust?

I hope it could just be the water pump?

otherwise what sort of bearings are in the head?

Idler pulley bro.

It sounds SO much worse than it is though huh? I crapped myself when mine started doing it. But with mine it went away after the car warmed up.

Check out my vid:

Same noise more or less. I changed my belts/idler/tensioner, goneburger :P

Idler pulley bro.

It sounds SO much worse than it is though huh? I crapped myself when mine started doing it. But with mine it went away after the car warmed up.

Check out my vid:

Same noise more or less. I changed my belts/idler/tensioner, goneburger :P

thanks for that man very helpful! i will get a gates kit and replace everything, its due for it anyway

let you guys know the results

if your not sure take it to a mechanic that is..... to me it sounds like it may be a few different things so best to take it to someone that can u tell u for sure and pinpoint the problem before it gets worse....

could me your lifters if u say it started doing it after sitting there for alittle while.

if your not sure take it to a mechanic that is..... to me it sounds like it may be a few different things so best to take it to someone that can u tell u for sure and pinpoint the problem before it gets worse....

could me your lifters if u say it started doing it after sitting there for alittle while.

the timing belt is due anyway so doesnt bother me or the owner to change it, he's giving me $100 to do it anyway :D

its not the lifters i know what they sound like

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...