Jump to content
SAU Community

Recommended Posts

yeah winthrop and murdoch have been targeted in the past 2 year in the summer time as ppl leave windows open and the pricks take the keys along with the car our house was broken into exactly two years ago "summer time" they got the keys but for the wrong car still they took the car and believe it or not my next door neigbours got broken into last nite wallet was stolen thats all believe to be the same ppl that did our house as they went into our backyard 1st then check the niegboors "bit of a cowincednce as it was two year exactly on the nite of the robbery"

i rekon they come from willage snoopin around wintrop murdoch same group off ppl

stop pretending Al, we know you borrow porn from Video Ezy :rofl:

all my neighbours have gotten broken into... the ones behind, and on the left and right of my hse... esp during festive season a lot of robbers come out and play.. which is why we have double the number of guards at home during Christmas, Chinese Nwe Year etc..

oh here in Msia you can practically kill someone who breaks into ure hse and guess what? you don't go to jail ;)

oh here in Msia you can practically kill someone who breaks into ure hse and guess what? you don't go to jail :rofl:

Cool, so that means if you set it up well you can invite lots of people into your house, make it look like a break in and slaughter them all? :chop:

:uzi:

hahahahah

well actually most of the break ins in Malaysia are done by illegal immigrants so when something happens to them, the authorities dont take any further action... i know it sounds mean but hey, we've got over 1 million illegal immigrants in a country of 20 million

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...