Jump to content
SAU Community

R34 Genuine Top Secret Carbon Bonnet

CYA_34

By CYA_34,
in Classifieds

 Share

Recommended Posts

CYA_34 Enthusiast

CYA_34

Posted
Posted (edited)

For Sale my Genuine Top Secret Carbonfibre bonnet to suit R34 Gt-t or GTR. It is used but in good condition, it's extrmemely light.

The bonnet is single layer carbonfibre with internal carbon bracing. Included are the bonnet latch locks and bonnet hinges (R34GTR Hinges) to match the bonnet.

This bonnet is rare and looks very agressive, a must for your R34 for drift or street. :cool

Only asking $650 or make a reasonable offer.

Cheers

Chris

Edited by CYA_34
  • 2 months later...
GTR_driver Contributor

GTR_driver

Posted
Posted
As far as I'm aware no Full carbon bonnet is ADR Approved.

Cheers,

Chris

Does anyone know if this bonnet is still available?

I'm looking for a Top Secret bonnet the same - Brisbane, south side.

Thanks.

  • 3 months later...
ax_ Newbie

ax_

Posted
Posted
For Sale my Genuine Top Secret Carbonfibre bonnet to suit R34 Gt-t or GTR. It is used but in good condition, it's extrmemely light.

The bonnet is single layer carbonfibre with internal carbon bracing. Included are the bonnet latch locks and bonnet hinges (R34GTR Hinges) to match the bonnet.

This bonnet is rare and looks very agressive, a must for your R34 for drift or street. :cool

Only asking $650 or make a reasonable offer.

Cheers

Chris

know that the thread is several months old but thought to hear if you have the hood still for sale?

if you have it please send an email to [email protected]

/andreas

  • 2 months later...
GTR_driver Contributor

GTR_driver

Posted
Posted

Here's the new home ..... after the first coat of 2 pack, will sand this back when hardened for a final clear coat.

Some chips and holes filled in, the 2 pack has now shrunk into them (finished 2 days ago). Bonnet should come up nicer than this when finished.

Original gel-coat was sanded back with 1200 grit, then finished with 1500 grit after all the stickers were removed. PPG 2 pack, first coat tinted with 5% black.

Photos taken with the phone ...

IMAG0001_a.jpg

IMAG0002_a.jpg

IMAG0003_a.jpg

  • 1 month later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...