Jump to content
SAU Community

Recommended Posts

ive read the diy thread on toluene and iam thinking about tuning my car on a mix of the stuff , but does anyone know how much of a measurable difference does it make say in rwkws, has anyone on this forum tuned there skylines on the stuff? what difference has it made? and if so with what other modifications?

rns11z what sought of power were you making and at what boost setting with the gt30 500hp turbo before and after running toluene? Dr Drift do you tune link aftermarket ecu? i spoke to ian weightman of amberley autos in dandenong and said he wouldnt touch it, he said that he only likes to tune apexi fc , autronic and motec!!!! what do you make of this? oh yead he reckons micro tech and wolf is crap too!! guess no one told him yet that there are a few skylines running 9 and 10 sec passes on these so-called crap ecus!! not every body has got a spare $4500 for motec! no matter how good they are.

RedLineGTR - Haven't tried to source it personnaly, but I beleive you buy it from BP at a 'cleaning' agent.... refer to other posts about it.

SMB315 - Yes you can run more boost, but you'll still be limited if running the standard ceramic wheels.

bigcarl- Yes I can and have tuned several link ecu's and I know why Ian won't tune them, for the same reason I won't recommend them. I only tune them if someone already has one. The older microtech's were fairly neanderthal but the new ones have full map matrix tuning on fuel and pretty good ignition mapping. Wolf looks very good on paper, only done a couple of these though with mixed thoughts. Personnaly my favourites are re-mapping the standard ECU's just wish i could do the RB25's economically.

Also, for reference my old 180sx was running a pretty much standard setup with a remapped ECU, 1.1 bar of boost, and a 20% Toluene mix... Result = 13.5 @ 98 MPH

Hey Pred..... what evil are you planning?

Dr Drift, I may be in a position for some toulene tuning in about 3-4 weeks all going well with the engine rebuild. Getting the PFCas recommended by a well known performance tuner so I will be looking for the right settings for the track (circuit)

dr drift, have you tunedany skylines with a gcg 450hp highflow st.1 turbo? if so what sought of power at what boost levels? do you think my turbo would still efficient up to say 1.5 bar of boost? on 98ron and 1.7 on 20% toluene with standard internals?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
    • I _think_ that one has a christmas tree or some other retainer spike into a hole in that panel under it. Come in under it with thin scredrivers and just pry it gently up. If you rip the ears off the retainer pin....so what? Just stick it back down after with a bit of race tape and carry on with life.
×
×
  • Create New...