Jump to content
SAU Community

How U Drive In The Rain

08yannch

By 08yannch,
in Western Australia

 Share

Recommended Posts

08yannch Rising Star

08yannch

Posted
Posted

i h8 driving in the rain

high every body. im starting this thread to see how other ppl handle driving in the rain (eg driving style, routines, tire pressure, different tires, anything) and if they loose traction and what to avoid on the road.

Link to comment
https://www.sau.com.au/forums/topic/316557-how-u-drive-in-the-rain/
Share on other sites
  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

ichizora Enthusiast

ichizora

Posted
Posted

I had a pretty scary experience sliding out of a roundabout just last week actually, thankfully managed to regain traction... Now I just try to keep the revs low and drive slowly and keep a big distance from the car in front. Also I don't touch the throttle when turning, learnt my lesson :D

08yannch Rising Star

08yannch

Posted
  • Author
Posted

well 4 me i use the snow button (auto skyline) if it has just rained and i have stopped at lights or any were and am turning i will keep it in 2nd till i have stopped turning. leaving longer braking distances, take of slower and take corners slower. i also avoid all lines and arrows on the road and when i stop at lights i keep my tires of the middle of the lain as thats were all the oil is.

i will still loose traction sometimes, especially at take of and i have to avoid stops on hills especially when i have to turn left or right. maybe its time to invest in some all yr round tires instead of my maxxis witch seem to never loose tread witch leads me to believe they not to good 4 gripping the road

StealthX Veteran

StealthX

Posted
Posted
You guys must have shocking tyres...... I've got toyo's and no slide whatsoever. Have to be a complete dickhead to lose traction...

lol idiot James! You've got AWD and 240ish mm of tyres all round. Spare a though for the rubber challenged brethren who are stuck driving their mum's car while they install a new turbo...

N16 pulsar understeer yay!

ichizora Enthusiast

ichizora

Posted
Posted

I think OP is concerned about RWD mostly. I've got 255 Federal SS595 on the rear, very easy to slide... looking at getting wider wheels soon though, gonna try some Kumhos I've heard good things about them :D

diamondjo Collaborator

diamondjo

Posted
Posted

From a driver training course I did: pump your tires up. The intuitive thing would be to let your tires down right? Not so, because when you let your tires down, the centre of the tire makes less contact with the road. Even though it looks like you've got a fatter profile and its harder to steer so it feels like you're glued to the road - the middle bit that you can't see flexes upwards. It's only harder to steer because you're fighting the tire deforming due to lack of pressure. This also makes it more likely that you'll have a blowout - the tire wall is contantly flexing as it goes round and round so it heats up and wears faster.

Tires are actually a form of pump, that's why you have ridges in them - to pump the water away from the contact surface and out the back. Good contact = good tires. Letting your tires down in sand works because you're on a loose surface that changes its profile when you roll over it - so you want your tire to deform with the surface. Roads are hard so you don't want deformation :D.

Related: Manufacturers recommended pressures on your placard are actually a trade-off between ride-comfort and safety. If the placard says 32, go 36 or even a bit more. Uneven wear (when the centre of the tread wears faster than the outside) only really happens when you pump up to ludicrous pressures. Also, if you're running low-profiles, ignore the placard completely and run a few PSI over the manufacturer's recommended pressure.

I shit you not, since I started taking this advice - you have to be REALLY trying to break traction, it won't "just happen" and my tires are lasting a LOT longer.

Dani Boi Grand Master

Dani Boi

Posted
Posted (edited)
If you are losing traction in the rain, you are either doing it on purpose or you are a really f**king shit driver. Sell your car.

haha good call.

But seriously just keep your distance and dont go around corners at 4000rpm and you'll be right. Oh and get yourself some decent tyres if you haven't already.

Edited by Dani Boi
diamondjo Collaborator

diamondjo

Posted
Posted (edited)

Oh and about losing traction? Let's assume you haven't just broken traction by being a tool and you've actually swerved to miss something in the rain and lost it. My good friend Mr Keets once told me after a bingle when I was on my Ps.

"In a spin? Both feet in!"

Edited by diamondjo
Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted (edited)
haha good call.

But seriously just keep your distance and dont go around corners at 4000rpm and you'll be right. Oh and get yourself some decent tyres if you haven't already.

I don't go anywhere near 4,000 rpm & the back end still seem a bit twitchy in the rain.

Even take off in a straight line, I pretty much need to keep throttle <30% otherwise there is a good chance the rear end will start twitching...

My tyres seem to be hopeless in the wet.

So now I drive super granny style in the wet, which means 0 to 20km/h acceleration takes close to 5 seconds or so.

Edited by Mayuri Krab

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...