Jump to content
SAU Community

Recommended Posts

The series one version of the Stagea was first produced in October 1966 until late 1998

LOLZ!

1966 never seen one that old.

Thanks for what I think are meant to be positive comments. It is/was my first attempt at a website so there were always bound to be mistakes. In fact almost all the info that was wrong came from wikipedia .

Will be getting an update soon .

Good info. While I've had an RS Four since 2006, have just acquired a 25G for my son. Out here you must have an open, 3 yrs experience, before you can drive a Turbo.

I noticed you listed the 25G as "Basic". Well apart from the tweeters in the A pillars and the electric tailgate closer it has all the refinements of the RS Four.

The way these cars were originally bought JDM is a long way from the basic models.

The nice part about the two Stags is that they loo identical, even down to the N/A grille. LOL

didn't realise it was your site

seems like there is a bif of info on there

needs some bits and pieces about the rs4s's :(

Because of age the RS Four S has only been available in the uk recently so there not much info on this model over here yet.

Edited by RSVFOURUK

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...