Jump to content
SAU Community

Recommended Posts

Hey guys

I've got an r32 gts-t and I've got some 18x11.5" +26 work vs-xx wheels coming, and I need rear wide fenders to fit them.(preferably +50mm)

I've rang savanna motorsports the Origin dealer for aus, and they informed me that Origin do not make wide rear over fenders for the r32.

So I'm begging you guys to lead me in the right direction for some GOOD quality rear fenders. I want them to fit straight up, I don't want to have to stuff around with fuel filler in particular. Please, do you know any good brands?

Link to comment
https://www.sau.com.au/forums/topic/316641-r32-gts-t-wide-fenders/
Share on other sites

I've got an r32 gts-t and I've got some 18x11.5" +26 work vs-xx wheels coming

*sigh* you saw a set of wheels on YAJ and went "OMG fullysick dishhh uleh I must have it!" didn't you?

What you probably didn't account for is that 11.5 +26 makes your wheels sit around 2 inches too far inside so it will hit your shocks unless you run some chronic spacers. This is in addition to sticking out of your guards by about 30mm, so lets say you space out the wheel by about 30mm to clear the shocks, you'll then need a 60mm overfender to clear the rim (run stretched tyres and you should be able to sit it at a decent height and not collect the fibreglass fender with your tyre and send it all to hell... or look like poser and run it at 4WD height).

So I'm begging you guys to lead me in the right direction for some GOOD quality rear fenders. I want them to fit straight up, I don't want to have to stuff around with fuel filler in particular. Please, do you know any good brands?

rear fenders NEVER fit straight up. not even japanese ones. I imported a set of D-Max ones straight out of japan and even then we had to trim the fibreglass and sand out the imperfections etc.

http://www.dmax-cs.com/aero/r32/index.html

http://page9.auctions.yahoo.co.jp/jp/auction/k121228644

Nice buy from Import Monster though, and 155,000Y isn't actually that bad a price for em. But I wouldn't wanna be the guy trying to shoehorn them under an R32 GTSt, especially the 10.5 +26 in the front, without resorting to something like a BN widebody kit.

How the hell did u find the auction I got my wheels from haha. Yes a very good buy, and I've seen same wheels on gtr32 but 10.5 front n rear, and I wanted rears to be slightly wider I was actually waiting for the wheels for a while. I've got gtr front end already just need rears. A mate has some viva garage ones and I held them up and they needs about an inch cut out front and rear of wheel arch, they are the complete wrong size

How the hell did u find the auction I got my wheels from haha. Yes a very good buy, and I've seen same wheels on gtr32 but 10.5 front n rear, and I wanted rears to be slightly wider I was actually waiting for the wheels for a while. I've got gtr front end already just need rears. A mate has some viva garage ones and I held them up and they needs about an inch cut out front and rear of wheel arch, they are the complete wrong size

lol do a search for "VIVA garage fenders" in this section, and you'll find pics that I took of a set that were delivered to me.

  • 3 months later...
11.5 +26 wow, ive got not even 1 cm clearance on my coilovers with 10.5 +/- 0, your guna one BIG spacer my friend

thats no spacers, bolted straight onto the hub :/ i bein offered 5g for these wheels i said noooo f*kin way hahaha they are huge, them rubbers are 295 streched on, cant beat that

yea definately would hav taken the cash and ran. IMO all the aftermarket fenders out there ruin the clean lines of the r32, they just make the car look silly even when done to a high standard. get some rims that actually fit and dont make it look like a clown car.

GTR oem guards FTW

  • 3 years later...

Sorry to dig up this thread.. Didn't want to make a new one.. Did a search and found some useful info.

But, not exactly what I'm after.

I may of answered my own question.. With the stock 32 gtst wheel (16x6.5 unsure of offset)

I will have to widen/role my guards for a set of 32 GTR wheels? (16x8 +30)

Thanks guys.

Couple hundred too much IMO. But it depends on how much they are worth to you. I sold my Volk SF Challenge set (17x9+22) for less with near-new tyres!

Well I would live some rays te37s but waaay out of my price range haha..

Maybe one day.

Rough price on 32 GTR wheels with or without tyres? In your opinion :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...