Jump to content
SAU Community

Recommended Posts

Hey guys

I've got an r32 gts-t and I've got some 18x11.5" +26 work vs-xx wheels coming, and I need rear wide fenders to fit them.(preferably +50mm)

I've rang savanna motorsports the Origin dealer for aus, and they informed me that Origin do not make wide rear over fenders for the r32.

So I'm begging you guys to lead me in the right direction for some GOOD quality rear fenders. I want them to fit straight up, I don't want to have to stuff around with fuel filler in particular. Please, do you know any good brands?

Link to comment
https://www.sau.com.au/forums/topic/316641-r32-gts-t-wide-fenders/
Share on other sites

I've got an r32 gts-t and I've got some 18x11.5" +26 work vs-xx wheels coming

*sigh* you saw a set of wheels on YAJ and went "OMG fullysick dishhh uleh I must have it!" didn't you?

What you probably didn't account for is that 11.5 +26 makes your wheels sit around 2 inches too far inside so it will hit your shocks unless you run some chronic spacers. This is in addition to sticking out of your guards by about 30mm, so lets say you space out the wheel by about 30mm to clear the shocks, you'll then need a 60mm overfender to clear the rim (run stretched tyres and you should be able to sit it at a decent height and not collect the fibreglass fender with your tyre and send it all to hell... or look like poser and run it at 4WD height).

So I'm begging you guys to lead me in the right direction for some GOOD quality rear fenders. I want them to fit straight up, I don't want to have to stuff around with fuel filler in particular. Please, do you know any good brands?

rear fenders NEVER fit straight up. not even japanese ones. I imported a set of D-Max ones straight out of japan and even then we had to trim the fibreglass and sand out the imperfections etc.

http://www.dmax-cs.com/aero/r32/index.html

http://page9.auctions.yahoo.co.jp/jp/auction/k121228644

Nice buy from Import Monster though, and 155,000Y isn't actually that bad a price for em. But I wouldn't wanna be the guy trying to shoehorn them under an R32 GTSt, especially the 10.5 +26 in the front, without resorting to something like a BN widebody kit.

How the hell did u find the auction I got my wheels from haha. Yes a very good buy, and I've seen same wheels on gtr32 but 10.5 front n rear, and I wanted rears to be slightly wider I was actually waiting for the wheels for a while. I've got gtr front end already just need rears. A mate has some viva garage ones and I held them up and they needs about an inch cut out front and rear of wheel arch, they are the complete wrong size

How the hell did u find the auction I got my wheels from haha. Yes a very good buy, and I've seen same wheels on gtr32 but 10.5 front n rear, and I wanted rears to be slightly wider I was actually waiting for the wheels for a while. I've got gtr front end already just need rears. A mate has some viva garage ones and I held them up and they needs about an inch cut out front and rear of wheel arch, they are the complete wrong size

lol do a search for "VIVA garage fenders" in this section, and you'll find pics that I took of a set that were delivered to me.

  • 3 months later...
11.5 +26 wow, ive got not even 1 cm clearance on my coilovers with 10.5 +/- 0, your guna one BIG spacer my friend

thats no spacers, bolted straight onto the hub :/ i bein offered 5g for these wheels i said noooo f*kin way hahaha they are huge, them rubbers are 295 streched on, cant beat that

yea definately would hav taken the cash and ran. IMO all the aftermarket fenders out there ruin the clean lines of the r32, they just make the car look silly even when done to a high standard. get some rims that actually fit and dont make it look like a clown car.

GTR oem guards FTW

  • 3 years later...

Sorry to dig up this thread.. Didn't want to make a new one.. Did a search and found some useful info.

But, not exactly what I'm after.

I may of answered my own question.. With the stock 32 gtst wheel (16x6.5 unsure of offset)

I will have to widen/role my guards for a set of 32 GTR wheels? (16x8 +30)

Thanks guys.

Couple hundred too much IMO. But it depends on how much they are worth to you. I sold my Volk SF Challenge set (17x9+22) for less with near-new tyres!

Well I would live some rays te37s but waaay out of my price range haha..

Maybe one day.

Rough price on 32 GTR wheels with or without tyres? In your opinion :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...