Jump to content
SAU Community

Workshop To Fit Gtr Center Cluster On R34

robjay

By robjay,
in Western Australia

 Share

Recommended Posts

robjay Enthusiast

robjay

Posted
Posted

Hi All,

Do you know where if at all anyone here in WA can fit the GTR34 center LCD console...

I went down to local radio & hifi shop and they had some interesting double din lcd tv / cd players that had a g sensor and gps .. some pioneer deck .. cant remember what it was but that started me wishing for an r34 lcd.

But other than that what other decks you think are cool to have on a skyline.

bubba Grand Master

bubba

Posted
Posted

Or get a single din, foldout LCD and run a CarPC with Datascan..

Have you even thought about what you would do with the GTR screen? are you hoping you get all the fancy GTR readouts? because I don't think that's going to happen by just installing the screen :D

robjay Enthusiast

robjay

Posted
  • Author
Posted
Or get a single din, foldout LCD and run a CarPC with Datascan..

Have you even thought about what you would do with the GTR screen? are you hoping you get all the fancy GTR readouts? because I don't think that's going to happen by just installing the screen :P

Ok giving it a miss then, Datascan is a bit overkill, just wanted it for the wow factor.

bubba Grand Master

bubba

Posted
Posted

Not overkill, very handy for troubleshooting, diagnostics and peace of mind :P

I was running it in the skyline on the carpc for a couple of years and am putting a similar setup in the wagon soon.

robjay Enthusiast

robjay

Posted
  • Author
Posted
Not overkill, very handy for troubleshooting, diagnostics and peace of mind :P

I was running it in the skyline on the carpc for a couple of years and am putting a similar setup in the wagon soon.

Cool, could you point me to some links on what it can do and looks like / where to get it. Maybe a photo of your own setup?

bubba Grand Master

bubba

Posted
Posted

This is the PC I have (I have two, one installed in the Skyline, one waiting to be installed in the Stagea): http://www.mini-box.com/VoomPC-2-Car-PC-Ba...mp;category=101

I had to get a hdd, dvd drive and a stick of ram locally.

I was running a 7" in-dash LCD (these aren't cheap, if you don't want it to fold away then you can go for something cheaper), that screen has been removed to go into the Stagea and I will be putting a USB touchscreen in the Skyline.

No pics of the setup :) I did have some up on the forums a couple of years ago just after I installed the setup but they are gone :P

robjay Enthusiast

robjay

Posted
  • Author
Posted
This is the PC I have (I have two, one installed in the Skyline, one waiting to be installed in the Stagea): http://www.mini-box.com/VoomPC-2-Car-PC-Ba...mp;category=101

I had to get a hdd, dvd drive and a stick of ram locally.

I was running a 7" in-dash LCD (these aren't cheap, if you don't want it to fold away then you can go for something cheaper), that screen has been removed to go into the Stagea and I will be putting a USB touchscreen in the Skyline.

No pics of the setup :) I did have some up on the forums a couple of years ago just after I installed the setup but they are gone :P

Ok this looks plausible.. I'm thinking along the lines of a touch screen and windows media center ... maybe asking a too much lol..

Hard part is interfacing the PC to engine telemetry, how would one actually tap into the cars ecu.

Ehgriez Mentor

Ehgriez

Posted
Posted

Theres a guy on here who had a pretty decent setup.

7" double din touchscreen, search for liliput touchscreen on the american ebay and thats what he was using , cost 450 or so i think

Had a little netbook in the glovebox nad was using centrafuse media centre or something to control it

Had a consult cable and that as well.

If you were gonna set something up, I'd do this.

bubba Grand Master

bubba

Posted
Posted
Theres a guy on here who had a pretty decent setup.

7" double din touchscreen, search for liliput touchscreen on the american ebay and thats what he was using , cost 450 or so i think

Had a little netbook in the glovebox nad was using centrafuse media centre or something to control it

Had a consult cable and that as well.

If you were gonna set something up, I'd do this.

Pretty much the same as my setup except I used a dedicated carpc with a proper 12v dc-dc power supply (intelligent, it won't just cut power when you turn the car off, I have mine set to wait 30 seconds then soft-off the PC).

Interfacing to the engine telemetry is easy, I ran a consult cable permanently plugged into the carpc. I used Nissan Datascan for the data and/or logging, they even have a carpc version now that is more purely for readouts than diagnostics/logging.

7" single din touchscreen, also have a trackball stashed next to the transmission tunnel for fiddly stuff and have been meaning to get a roll-up keyboard.

I use RoadRunner as a front end to play music/videos/etc but mostly sit on the Datascan dashboard screen with RPM and Water Temp gauges, RPM and speed alert.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...