Jump to content
SAU Community

Recommended Posts

You only have issues when you do it without having the car tuned my car was stalling before I had it tuned then when its tuned for no bov it doenst stall and runs well
Probably doesnt have AFMs...lol.

my car was not tuned by this stage i didnt even have a ecu or boost controller just removed all the piping as i said and blocked off the bov.

my car had an afm at the time (got a v500 now so no afm)

i think it just depends on ur car and if u block it correctly but as i said i got over it and now have the ssqv

It's driving style related as well.

I didn't have a BOV for ages on a previous setup (stock ECU).

I could drive all day and not have it stall, or i could make it stall by changing how i was driving the car.

EG. If you get med-hard onto the brakes coming to a set of lights and hit the clutch/neutral whilst still moving reasonably quick, car would stall.

If i can in lightly on the brakes and only hit the clutch/neutral as i came to a stop, car would not stall at all.

It's definitely possible for it to stall without a BOV/Factory ECU, and it is also possible for the direct opposite.

There are just to many influencing factors either way. If you take off the BOV and you don't have problems - great.

However don't expect that to be the case in every situation & vice versa

2 things.

1.) if you disable your bov, you will get the sound you want so why do you want to get a metal pipe?

2.) if you do get a metal pipe made, how hard is it to get 2-3 holes drilled and a small pipe welded to it so that all the existing things that you need (breather etc) can be connected to it?

It's driving style related as well.

I didn't have a BOV for ages on a previous setup (stock ECU).

I could drive all day and not have it stall, or i could make it stall by changing how i was driving the car.

EG. If you get med-hard onto the brakes coming to a set of lights and hit the clutch/neutral whilst still moving reasonably quick, car would stall.

If i can in lightly on the brakes and only hit the clutch/neutral as i came to a stop, car would not stall at all.

It's definitely possible for it to stall without a BOV/Factory ECU, and it is also possible for the direct opposite.

There are just to many influencing factors either way. If you take off the BOV and you don't have problems - great.

However don't expect that to be the case in every situation & vice versa

thats the issue im having

i just adjusted my driving style to suit and it never stalls now :(

btu i have a stock bov on with a emanage ultmiate piggyback

i dont get why everyone hates on the noise of them?? i think they sound fantastic.. spose you's all think antilag is shit aswell.

i think there should be more people who can be happier with a simple mod to produce a simple sound.. how is this any stupider than those that want 400hp for no real reason and have nowhere to use it... or want to break a time barrier and spend thousands of dollars for a few milli-seconds.

how many of you guys bagging out the "dose pipe" have a reasonably noisy exhaust?? or are you all under the 90db limit??

the chu chu sound is no more common/easily recognised than a hks ssqv.

you mod your car for you, and only you need to be happy with it.

and blocking off the bov wont give you the same sound.. you need a metal intake pipe to get the full chu chu chu noise.

and i didnt have any problems with stalling..

straight pipe is fine, you dont need a small pipe attatched, your oil breather goes to your catch can, not back into the intake, and the bov is disconnected so its not relevent.

having said that.. you can still get a cool reversion sound by having the bov recirc line enter after the turbo.. not in the intake.

  • Like 1
All depends on where your boost gauge was getting its reading from, if it is at the correct source of the plenum, then no it wouldn't be.

It was actually connected just in front of the throttle body so it only read boost...couldnt be assed t-ing into fpr line and S15 have very few places to hook into...it def showed positive boost pressure on the gauge between gears (like 8-10psi) which would suggest that it held boost in the piping without the BOV?

To do this properly you need to;

1. remove the whole stock intake including the pipes to the bov and oil breathers

2. block/remove bov

3. move the afm onto the cooler pipe (stops stalls and maintains mapping)

4. make your oil breather vent to atmosphere (put a breather filter on it or add a catch can + filter)

5. fit a 2.5" metal pipe 120 cm long to the front of the turbo. Gl fitting a pod in there your power steering pump is in the way, you may want to try a slight bent pipe (I haven’t tried this so I cant say you will get the noise)

I have set this up on two of my mates 33s in the past and the sound is the typical (dolphin/pidgin) noise.

You will loose some power if you are running a standard ecu and can possibly damage the turbo.

That said if you want the noise that is the way to achieve it properly.

And just for the record I don’t run this setup, my 33 is happily running the stock bov and air box :blink:

This should answer the questions. Thread can now be closed.

To do this properly you need to;

1. remove the whole stock intake including the pipes to the bov and oil breathers

2. block/remove bov

3. move the afm onto the cooler pipe (stops stalls and maintains mapping)

4. make your oil breather vent to atmosphere (put a breather filter on it or add a catch can + filter)

5. fit a 2.5" metal pipe 120 cm long to the front of the turbo. Gl fitting a pod in there your power steering pump is in the way, you may want to try a slight bent pipe (I haven't tried this so I cant say you will get the noise)

I have set this up on two of my mates 33s in the past and the sound is the typical (dolphin/pidgin) noise.

You will loose some power if you are running a standard ecu and can possibly damage the turbo.

That said if you want the noise that is the way to achieve it properly.

And just for the record I don't run this setup, my 33 is happily running the stock bov and air box :D

This should answer the questions. Thread can now be closed.

hey 1.2 meters is abit long isnt it..???

12 cm sounds about right... thanks for the information anyways... this job is allready complete and dosing away...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...