Jump to content
SAU Community

Recommended Posts

It's been a year since the last one and I've been prompted by some serious Skyline lovers... (well, and the LOLvo dude) to bring this back... and I think WE should.

Although, segregating people is not my thing so, ANYONE can attend... none of this "MEMBERS ONLY" bullshit which basically sucks.

Details of meeting point as well as convenient date and time are now up for discussion.

This is known as a classic in this here parts (info for n00bs and their guests) and of course we would prefer to have only those who love their license as much as they love their cars attend... for obvious reasons.

My first suggestion is that we change it from being a night cruise to being a day one... say on a Sunday in the near future.... it makes for better pics in my opinion....

aaaannd....

GO!

UPDATE:

Sunday June 6th!!

Meet: Chatswood Chase Car Park, Enter off Victoria Ave

Time: 3:00pm, Leave by 3:30pm

Destination: Palm Beach via Newport for Pizza.

Bring: CB's, a full tank of fuel and a GOOD attitude.

As always, don't do anything silly as we are on public roads and we do not want bad attention drawn to the group...

We are enthusiasts not hoons or a gang of ANY type out for a drive NOT a race!!!

Traffic will not be an issue because we will stick together and to the speed limit at ALL times.

If you decide to do the wrong thing.....YOU WILL BE REPORTED TO POLICE - this is NOT a joke.

Pizza Place:

Lucky's & Pep's Pizza Bar

Shp2/ 303 Barrenjoey Rd Newport 2106 (02) 9979 1756

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

sure, the beach is normally full in Autumn hehehe... I was thinking maybe start the cruise at say 3pm..

by that time, beach goers are normally over it, leaving the car park pretty empty...

sure, the beach is normally full in Autumn hehehe... I was thinking maybe start the cruise at say 3pm..

by that time, beach goers are normally over it, leaving the car park pretty empty...

Mars, the only carpark that springs to mind that could possibly handle a large number of cars is the one at the far end of the Newport straight, and you would be surprised, it will still be packed even in autumn, and even at 3pm as there is a large park next to the beach and its always very very busy.

I like the traditional night time cruise although it would be good to eat at the pizza joint for an hour or so and then cruise on up to Palm Beach, seems as though everyone disappears soon as they get their pizza order.




  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...