Jump to content
SAU Community

Recommended Posts

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

After some 18x11 +18 for an r33 Gtr shipped to 2113...........thx

Currently we're sold out of this size and have only got 18x10+20 in stock. If you want to place an order please call us 039547 8100, we can have them here around May if you order now.

Cheers

we have 18x10+20 in stock, should clear the rotors easy..

how much body work is needed to be done after and how would 18x9.5 +16 fit will there be much if any rubbing on a full lock of the steering

how much body work is needed to be done after and how would 18x9.5 +16 fit will there be much if any rubbing on a full lock of the steering

We fitted a set on an R32 and only the rears were rolled, i don't think you would have much trouble with 18x9.5+16

Hi,

I would like a set of 18's or possibly 19's if I can fit them on a 33gtst. What size and offset would you suggest? How much would they be? And I would need them delivered to Gladstone qld 4680. Thankyou

Hi,

I would like a set of 18's or possibly 19's if I can fit them on a 33gtst. What size and offset would you suggest? How much would they be? And I would need them delivered to Gladstone qld 4680. Thankyou

Hi there,

For the GTST there isn't much offsets for them, you can get F:18x9+45 and R:18x9.5+35 or +40. We currently don't have these in stock but can order them to arrive in June, you'll be looking at $3500 delivered. As for the 19's the offsets are way to aggressive..

We have the following 18's and 19's in stock if you like to run camber like crazy or go wide body;

18x9.5+22

18x10+20

18x10.5+15

18x11+18

19x9.5+22

19x10.5+22

19x10.5+12

Cheers

Ken

HI, Im after a set of Black 18in TE37's for a Nissan Stagea 260rs, what width and offset would you suggest? How much with delivery to 2289?

Much appreciated

Not sure the offset on the Stagea, i think they run around +30. I would recommend 18x8.5+30 and 18x9.5+35. The original TE37 is much more expensive and in custom black. It will set you back $3800+$80 delivery

Cheers

Ken

Hey mate,

What will a set of the SLs set me back in either

18x10.5"

or

18x11"

For an R32 GTR

Do you have these sizes in stock, if not how long before they arrive?

Cheers.

Hey mate,

What will a set of the SLs set me back in either

18x10.5"

or

18x11"

For an R32 GTR

Do you have these sizes in stock, if not how long before they arrive?

Cheers.

None at the moment but will have them in about 2 weeks, these sizes sell fast. We have 18x10+20 in stock, which is perfect fitment for the R32. 10.5 OR 11 will require abit of negative camber and front and back guards rolled.

$3500 for 10.5

$3600 for 11

Cheers

Ken

^^

Hi Ken,

Thanks for you reply mate.

The car is a circuit car only, so the negative camber will be no issue and are happy to roll the arches to accommodate the extra rim width.

The reason we're hoping to run either a 10.5" or 11" is to be able to fit something along the lines of a 265mm or 270mm wide slick both front and rear.

Will you be posting here when they arrive in your shop?

Ollie.

^^

Hi Ken,

Thanks for you reply mate.

The car is a circuit car only, so the negative camber will be no issue and are happy to roll the arches to accommodate the extra rim width.

The reason we're hoping to run either a 10.5" or 11" is to be able to fit something along the lines of a 265mm or 270mm wide slick both front and rear.

Will you be posting here when they arrive in your shop?

Ollie.

Hi Ollie,

Yeah, i will. Seems like everyone likes the extra wide widths on the track these days-265/70 would easily fit the 10.5 or 11 or even 10's.

Sending two sets to QLD for a R35 when they arrive and a lot of other cars will be running these at the Time Attack in Sydney!!

Cheers

Ken

do you have 19x9.5+12 in stock if so how much is a set and do you have photos of them fitted to a r32 gtr

SL don't come in +12 in 19x9.5, they come in +22

We only have 2pcs instock at the moment, more in about 1.5 weeks.

we have the following in stock

19x10.5+22

18x10+20

18x9.5+22

arriving in 1.5 weeks

19x9.5+22

19x10.5+12

18x10.5+15

18x11+18

cheers

ken

  • 2 weeks later...

Ken

Price for TE 37 sl in 19x10.5+12 to fit R34 GTR delivered to Brisbane.

Or TE 37 same size in silver.

Thanks

Ross

Hi Ross,

SL delivered is $3600 instock

Silver TE37 is $4100 delivered but needs to be ordered and is going to take about 3-6months depends on production

Cheers

Ken




  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...