Jump to content
SAU Community

Recommended Posts

previously had a kill switch style immob, however it failed and had to have it removed.

looking for a keyless entry with alarm/immob for supply and fit.

recomendations? seen alot of autowatchs in search, however no one has stated a particular model or a installer.

thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/317686-car-alarm-immob/
Share on other sites

Chris Rogers, in Brissy

SAU member link

and Turbo Timers aren't legal in AU. and pointless IMO

ADR 25-Turbo timers are not to be fitted to vehicles manufactured on or after 1 January 1972 (ADR 25 Anti-

Theft Locks). ADR 25 requires that the normal function of the engine only occurs when the ignition

lock is in the engine on position

Link to comment
https://www.sau.com.au/forums/topic/317686-car-alarm-immob/#findComment-5193770
Share on other sites

The Autowatch 446rli Premium would best suit your Skyline with its built in turbo timer feature.

As for Installers...what state are you in?

Yeah speak to Chris mate.

Oh, and yes thank you sapphire, for that information.....as if we didn't know, that so I suppose we are going to have to arrest at least 5 million people here in Australia for breaking the law. :D

Link to comment
https://www.sau.com.au/forums/topic/317686-car-alarm-immob/#findComment-5194857
Share on other sites

Yeah speak to Chris mate.

Oh, and yes thank you sapphire, for that information.....as if we didn't know, that so I suppose we are going to have to arrest at least 5 million people here in Australia for breaking the law. :)

If you promote something Illegal then your part of the problem with kids getting defected for them, which is bad business!!!

I don't like the ADR laws either , in USA you can go nuts without fear , COPS fight real crime in USA they don't have time for filling the coffers with defect notices

just leave for your destination 1 min earlier then let it idle with you in it?

end rant

Link to comment
https://www.sau.com.au/forums/topic/317686-car-alarm-immob/#findComment-5195753
Share on other sites

Yea and the security risk of turbo timers, since most people don't install them with a proper alarm. There are a couple stories of people having their cars nicked because they had a timer that didn't allow locking of the car (or they didn't bother), so until the car actually turns off and arms, you got a 1-5 minute window.

Link to comment
https://www.sau.com.au/forums/topic/317686-car-alarm-immob/#findComment-5196036
Share on other sites

I don't promote turbo timers sapphire and never have but 99% of my customers have a turbo timer or have intentions of getting a turbo timer, which won't work with some of my alarm systems as mentioned by Thelen. So as for me to eliminate the security risk of external turbo timers it is safer to have a turbo timer built into the alarm software.

BTW You can shut the engine down instantly with any of my alarms be it Autowatch or Mongoose in the event of getting pulled over by the Police in which case they would not find a turbo timer under the dash, because I removed it to fit the Alarm/turbo timer.

I just think your trying to get a little too much into the nitty gritty of this thread. At the end of the day the initial questions were answered in a couple of posts

end rant

Link to comment
https://www.sau.com.au/forums/topic/317686-car-alarm-immob/#findComment-5196844
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...