Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
ive had two sets now, both have done this. wore the first set down past the tread wear, no problems.

Sounds like its nearly guaranteed if you had two sets do it.

How many kms did you get out of each? Track or street?

not exactly guaranteed....I've bought 2 sets of these and used for 6-18 months of road and track use with no splitting. So on the same logic you could say it is guaranteed not to happen :)

has anyone had an actual failure?

not exactly guaranteed....I've bought 2 sets of these and used for 6-18 months of road and track use with no splitting. So on the same logic you could say it is guaranteed not to happen :)

has anyone had an actual failure?

Haha true!!! How good is internet logic!! Im not that fussed or I wouldnt have ordered them anyhow.

I got them fitted last Thursday but have only had a chance to test them out in the wet, so not much of a test.. although they were confidence inspiring and surprisingly grippy in the wet.

Looking forward to some good weather so I can try them out properly.

Going from r comps my car now feels like a luxury barge with these tyres.

i got approx 20 track days out of the 595RS, plus driving to and from the track, cruise days, DECA etc. ~ 6-7,000km over 6 months

they grip well down to the wear indicators, then start to squeal and slide.

went to ku36 and did ~8 track days in 3-4 months, they are down to the wear indicators and have very little grip.

back on 595RSR now, love em. ~6 track days so far, they are wearing well. the grip is the wet and dry is fantastic.

and as i said all four have the 'line' in them this time around.

i do find the RS and RSR are not as progressive as the ku36 tho, when the federals loose grip they really let go. the ku36 seem

to give you a bit more of an indication.

i got approx 20 track days out of the 595RS, plus driving to and from the track, cruise days, DECA etc. ~ 6-7,000km over 6 months

they grip well down to the wear indicators, then start to squeal and slide.

went to ku36 and did ~8 track days in 3-4 months, they are down to the wear indicators and have very little grip.

back on 595RSR now, love em. ~6 track days so far, they are wearing well. the grip is the wet and dry is fantastic.

and as i said all four have the 'line' in them this time around.

i do find the RS and RSR are not as progressive as the ku36 tho, when the federals loose grip they really let go. the ku36 seem

to give you a bit more of an indication.

Thanks for the feeback! I plan on using them for street use only. Bit of a worry about them being relatively less progressive, I guess ill find out for myself soon enough.

Out of the KU-36 or RSR which do you prefer and can you please give some feedback about other differences between the two?

  • 8 months later...

old thread, but i'll add my 5c.

I've had this happen on a set of Hankook's and they didn't get much more than a quick burnout or 2. Nothing to worry about as long as the gap stays about that size and doesn't open up any more.

IMO those tyres are unroadworthy, and therefore you qualify for full replacement. The Fair Trading laws are strong and clear. Force them to replace the tyres, as you say its a safety issue.

I've used these for a couple of years on my stagea (circuit and road), and 350z (circuit, motorkhana skids and road) without any problems. might be a bad batch, might be bad luck...either way I would not accept anything but replacement or refund.

I had splits in 2x Nankangs on a Prelude. > Approached Blair's Tyres who are official agents in Oz > One phone call approved an immediate replacement.

Reason:- Even though these Nankangs were rated for high speed, the company felt that expansion under heat oscillating with contraction made the tyre unroadworthy.

Footnote:- Yes they're crummy tyres in the wet, but I applaud their customer service!

I have to replace my RE55s, just street driven no trackwork or hard driving, they've done around 15,000kms in over 3 years and still looking good.

It's really weird how they have gone in recent times with splits around the inside radius on all 4 tyres.

Well i have spoken to Miles at Federal today and asked if they can inspect the tyres on the car?

he said he will send me to tyres and more in south Brisbane (behind my work :) which is good)

Spoke to John (Really cool guy) at Tyres and more he inspected them called Miles at Federal tyres and I get new tyres tomorrow at lunch

The faulty tyres will be sent to federal in Brisbane for assessment by them

It’s not often I get a positive in these kinds of situations

  • 4 years later...

Bit of a thread bump but this was my experience with the 595 Rsr's.

Initially I was happy with the grip and that my understeer issue disappeared but... now.

Front tyres have eggs and don't roll in a straight line.

Left rear shows the tread having ripped away from the tyre, showing the steel belt inside. The belt has torn and there is nasty spikes of metal poking out. It has started to crack around the outside as well.

The seam/overlap join is visible on all tyres. Not exactly confidence building given that the tread is peeling away too.

My suspension guy says this is pretty common with federals and has seen it a bit recently in motorsport. But these tyres would have only seen over 200km/h on the dyno and have never had track time.

They have about 8000km on them. The mould air-release hairs are still on all the tyres. The rest of the time I am mostly stuck in 80km/h traffic with the occasional burst of acceleration.

Hope to swap these for some 4wd tyres instead from the local Federal dealer, and then off-load them to someone else.

Switching to Nitto's for the GTR.

post-26553-0-77651900-1449009603_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...