Jump to content
SAU Community

Recommended Posts

After reading an article, & after seeing the Best Motoring video of this car. I am hard to believe that this car only produces ~600hp with such minimal mods & being so so so faaast... I'm wondering if anyone has a link to the cars full specs list? I've tried to do a babelfish translate of the mines website link but some words etc.. are missing. here's the link:

http://babelfish.altavista.com/babelfish/u...tr%2Findex.html

Link to comment
https://www.sau.com.au/forums/topic/31827-mines-gtr-nur-specs/
Share on other sites

No.. that's what started me thinking, after reading that article & then viewing my video, I couldn't believe it. If you have seen the Best Motoring video, the japs go ballaistic over the car, saying something along the lines of "this would wake up a dead man it soooo fast"

Some things I'm confused about, the website says the engine is a Stage 2 upgrade??, but I think the video says the engine is stock apart from cams, cam gears & turbos. They even retain standard air box, rear brakes etc etc.. Although it does mention they highly focused on weight reduction. Reducing the total weight of the car to ~1300kg using carbon fibre, titanium etc. If I recall in stock form the R34 is around ~1550... a 250kg difference.

yeah but it will have bigger injectors, fuel regulator, fuel pump, head gasket, mines hardcore ecu with heaps of time in tunning, higher rev limit, 1.2-1.4 bar of boost, bigger radiator, more coolers than u can poke a stick at so it can work hard all day long. Prob have better manifolds and IC pipes with a bigger cooler. Very possible with these sorts of mods. They focus more on response that is y the bore and stroke are the same as stock, better response. That is y it is so fast. On boost at idle!!!! he he he. well not really but close.

Nismo32,

OK, I figured that.. but here are the specs from the site..."some are missing due to translation issues, so hopefully other can help"

BASED ON THE N1 GTR

The highest output 600ps/7400rpm

Largest torque 60kgm/5400rpm

Boost 1.4kg/cm2 (How many pounds is this??"

ENGINE: Stage 2 "Basically strenthed items & lightened pistons"

CAMS: IN 252°/lift 9.1mm

IN 260°/lift 10.2mm

EX 252°/lift 9.1mm

EX 252°/lift 9.5mm

"it stated as Cam Shore on the site, but i'm buggered why there are 4 cam settings"

CAM GEARS: Mine Adjustables

HEAD GASKET: Metal

INJECTORS: 600cc

ECU: Mines

AFM: Doesn't say "but does mentioned capable of 600ps"

TURBINE: HKS GT2530

PROPELLOR SHAFT: Carbon "what this?"

FUEL PUMP: 270L/h

EXHAUST:

Muffler マインズオリジナル silence VX PRO TITAN (90-115 Φ)

Front Pipe マインズオリジナル front pipe PRO TITAN (70x2-100-90 Φ)

Outlet マインズオリジナル super outlet PRO (70-70 Φ)

Air Filter マインズオリジナル VX air filter

AERO PARTS:

Diffuser Few sir マインズオリジナル carbon front D

Main Wing マインズオリジナル carbon main wing

Rear Wing Stay マインズオリジナル carbon rear wing stay

Rear Wing マインズオリジナル carbon rear wing

Trunk マインズオリジナル carbon trunk

Trunk Spoiler マインズオリジナル carbon trunk spoiler

Air Duct マインズオリジナル air duct

Mirror マインズオリジナル carbon aero mirror

Radiator Shroud マインズオリジナル carbon radiator shroud

-->Could these parts greatly reduce weight by 250kg, to around 1300kg???

--> The 600hp seems very achieveable, but if you've seen the video you'll understand how amazingly faaaaast this car is. Which makes me think, if I could achieve the 600hp mark in my GTR, I doubt it would be as fast as the mines car.

CAMS: IN 252°/lift 9.1mm

IN 260°/lift 10.2mm

EX 252°/lift 9.1mm

EX 252°/lift 9.5mm

"it stated as Cam Shore on the site, but i'm buggered why there are 4 cam settings"

There aren't 4 cam settings dude... Theres details of the inlet and exhaust cam for the Stage 1 engine, and details of the inlet and exhaust cams for the Stage 2 engine. Easy!
-->Could these parts greatly reduce weight by 250kg, to around 1300kg???

Yes...

--> The 600hp seems very achieveable, but if you've seen the video you'll understand how amazingly faaaaast this car is. Which makes me think, if I could achieve the 600hp mark in my GTR, I doubt it would be as fast as the mines car.
I think you'd come to the same conclusion after seeing the HKS Full Carbon bodied Evo VII. The Japanese have really concentrated on weight reduction in the last few years, just look at the C-West S200, the HKS Evo VII, Mines cars, the Cyber Evo Evo VII... seeing all those cars in action, they are bloody fast for what they are, eg: buyable road cars. My point is, the Mines R34 GT-R is but one of the super fast track cars in Japan, so at least to me it doesn't seem so unbelieveable that it can be as fast as what it is.

Rezz,

firstly, I know mines list some pricing, but with your contacts in japan... when you get a chance could you perhaps work out some rough estimates on similar weight reduction products as listed above eg:

PROPPELOR SHAFT, EXHAUSTS & AERO PARTS.

PS: did you get my email PM about the PE1820 turbo?

Rezz,

firstly, I know mines list some pricing, but with your contacts in japan... when you get a chance could you perhaps work out some rough estimates on similar weight reduction products as listed above eg:

PROPPELOR SHAFT, EXHAUSTS & AERO PARTS.

PS: did you get my email PM about the PE1820 turbo?

Havent u played gran tourismo?

U can buy all these parts for ya car in the game.

But seriously even if u built the engine the exactly to the same spec as what it says on their website, u will never get the car to handle and accelerate like the mines car. There will be a few secrets that they wont reveal which make all the difference

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...