Jump to content
SAU Community

Recommended Posts

After reading an article, & after seeing the Best Motoring video of this car. I am hard to believe that this car only produces ~600hp with such minimal mods & being so so so faaast... I'm wondering if anyone has a link to the cars full specs list? I've tried to do a babelfish translate of the mines website link but some words etc.. are missing. here's the link:

http://babelfish.altavista.com/babelfish/u...tr%2Findex.html

Link to comment
https://www.sau.com.au/forums/topic/31827-mines-gtr-nur-specs/
Share on other sites

No.. that's what started me thinking, after reading that article & then viewing my video, I couldn't believe it. If you have seen the Best Motoring video, the japs go ballaistic over the car, saying something along the lines of "this would wake up a dead man it soooo fast"

Some things I'm confused about, the website says the engine is a Stage 2 upgrade??, but I think the video says the engine is stock apart from cams, cam gears & turbos. They even retain standard air box, rear brakes etc etc.. Although it does mention they highly focused on weight reduction. Reducing the total weight of the car to ~1300kg using carbon fibre, titanium etc. If I recall in stock form the R34 is around ~1550... a 250kg difference.

yeah but it will have bigger injectors, fuel regulator, fuel pump, head gasket, mines hardcore ecu with heaps of time in tunning, higher rev limit, 1.2-1.4 bar of boost, bigger radiator, more coolers than u can poke a stick at so it can work hard all day long. Prob have better manifolds and IC pipes with a bigger cooler. Very possible with these sorts of mods. They focus more on response that is y the bore and stroke are the same as stock, better response. That is y it is so fast. On boost at idle!!!! he he he. well not really but close.

Nismo32,

OK, I figured that.. but here are the specs from the site..."some are missing due to translation issues, so hopefully other can help"

BASED ON THE N1 GTR

The highest output 600ps/7400rpm

Largest torque 60kgm/5400rpm

Boost 1.4kg/cm2 (How many pounds is this??"

ENGINE: Stage 2 "Basically strenthed items & lightened pistons"

CAMS: IN 252°/lift 9.1mm

IN 260°/lift 10.2mm

EX 252°/lift 9.1mm

EX 252°/lift 9.5mm

"it stated as Cam Shore on the site, but i'm buggered why there are 4 cam settings"

CAM GEARS: Mine Adjustables

HEAD GASKET: Metal

INJECTORS: 600cc

ECU: Mines

AFM: Doesn't say "but does mentioned capable of 600ps"

TURBINE: HKS GT2530

PROPELLOR SHAFT: Carbon "what this?"

FUEL PUMP: 270L/h

EXHAUST:

Muffler マインズオリジナル silence VX PRO TITAN (90-115 Φ)

Front Pipe マインズオリジナル front pipe PRO TITAN (70x2-100-90 Φ)

Outlet マインズオリジナル super outlet PRO (70-70 Φ)

Air Filter マインズオリジナル VX air filter

AERO PARTS:

Diffuser Few sir マインズオリジナル carbon front D

Main Wing マインズオリジナル carbon main wing

Rear Wing Stay マインズオリジナル carbon rear wing stay

Rear Wing マインズオリジナル carbon rear wing

Trunk マインズオリジナル carbon trunk

Trunk Spoiler マインズオリジナル carbon trunk spoiler

Air Duct マインズオリジナル air duct

Mirror マインズオリジナル carbon aero mirror

Radiator Shroud マインズオリジナル carbon radiator shroud

-->Could these parts greatly reduce weight by 250kg, to around 1300kg???

--> The 600hp seems very achieveable, but if you've seen the video you'll understand how amazingly faaaaast this car is. Which makes me think, if I could achieve the 600hp mark in my GTR, I doubt it would be as fast as the mines car.

CAMS: IN 252°/lift 9.1mm

IN 260°/lift 10.2mm

EX 252°/lift 9.1mm

EX 252°/lift 9.5mm

"it stated as Cam Shore on the site, but i'm buggered why there are 4 cam settings"

There aren't 4 cam settings dude... Theres details of the inlet and exhaust cam for the Stage 1 engine, and details of the inlet and exhaust cams for the Stage 2 engine. Easy!
-->Could these parts greatly reduce weight by 250kg, to around 1300kg???

Yes...

--> The 600hp seems very achieveable, but if you've seen the video you'll understand how amazingly faaaaast this car is. Which makes me think, if I could achieve the 600hp mark in my GTR, I doubt it would be as fast as the mines car.
I think you'd come to the same conclusion after seeing the HKS Full Carbon bodied Evo VII. The Japanese have really concentrated on weight reduction in the last few years, just look at the C-West S200, the HKS Evo VII, Mines cars, the Cyber Evo Evo VII... seeing all those cars in action, they are bloody fast for what they are, eg: buyable road cars. My point is, the Mines R34 GT-R is but one of the super fast track cars in Japan, so at least to me it doesn't seem so unbelieveable that it can be as fast as what it is.

Rezz,

firstly, I know mines list some pricing, but with your contacts in japan... when you get a chance could you perhaps work out some rough estimates on similar weight reduction products as listed above eg:

PROPPELOR SHAFT, EXHAUSTS & AERO PARTS.

PS: did you get my email PM about the PE1820 turbo?

Rezz,

firstly, I know mines list some pricing, but with your contacts in japan... when you get a chance could you perhaps work out some rough estimates on similar weight reduction products as listed above eg:

PROPPELOR SHAFT, EXHAUSTS & AERO PARTS.

PS: did you get my email PM about the PE1820 turbo?

Havent u played gran tourismo?

U can buy all these parts for ya car in the game.

But seriously even if u built the engine the exactly to the same spec as what it says on their website, u will never get the car to handle and accelerate like the mines car. There will be a few secrets that they wont reveal which make all the difference

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...