lilmissr32 Posted April 29, 2010 Share Posted April 29, 2010 Hi guys, I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane. I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them: BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir RADIATOR: Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!) TURBO KIT: Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer, stainless exhaust manifold, Drift air filter & custom pipe from compressor housing INTERCOOLER KIT: 600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum INJECTORS/PLENUM KIT: 870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body ECU/IGNITION KIT: Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads SUSPENION: Tein Super Street coilovers (near new) DRIVELINE: Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff) INTERIOR: eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/ Share on other sites More sharing options...
eXquiSit Posted April 29, 2010 Share Posted April 29, 2010 what lsd is in the gtr diff? Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5205290 Share on other sites More sharing options...
zebra Posted April 29, 2010 Share Posted April 29, 2010 how much for the x6 box and coils? and does it have all the wiring? Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5205315 Share on other sites More sharing options...
Luke_GTS-T Posted April 29, 2010 Share Posted April 29, 2010 prices? Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5205355 Share on other sites More sharing options...
lilmissr32 Posted April 29, 2010 Author Share Posted April 29, 2010 (edited) Prices are in next post below! Edited April 29, 2010 by lilmissr32 Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5205372 Share on other sites More sharing options...
lilmissr32 Posted April 29, 2010 Author Share Posted April 29, 2010 Prices are as follows: Built motor: $7000 (head in the process of being freshened up as is the block with new pistons/rings & bearings so will be a totally fresh motor with 0k's on it) Turbo kit: $2000 Intercooler kit: $400 Injector/Plenum kit: $1700 ECU/Ignition kit: $1750 Coilovers: $1500 Tailshaft: $400 GTR rear end: $800 eBoost2: $500 Gauges/mount: $200 The parts above combined, made 535rwhp on 21psi on pump fuel in my 32... Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5205404 Share on other sites More sharing options...
lilmissr32 Posted April 30, 2010 Author Share Posted April 30, 2010 what lsd is in the gtr diff? The diff is sold, sorry. Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5207877 Share on other sites More sharing options...
eXquiSit Posted April 30, 2010 Share Posted April 30, 2010 The diff is sold, sorry. no worries can i ask how much did it go for? and what lsd was in it? thanks! =) Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5207880 Share on other sites More sharing options...
lilmissr32 Posted April 30, 2010 Author Share Posted April 30, 2010 no worriescan i ask how much did it go for? and what lsd was in it? thanks! =) It was a stock 2-way mechanical diff! It sold for $550 Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5207927 Share on other sites More sharing options...
45ULT Posted April 30, 2010 Share Posted April 30, 2010 if it was in such good condition why is it being 'freshened up'? Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5208263 Share on other sites More sharing options...
lilmissr32 Posted May 1, 2010 Author Share Posted May 1, 2010 if it was in such good condition why is it being 'freshened up'? ... Mark, because I thought it's a good thing to do for the new owner - put in a fresh set of pistons/rings and refresh the head. At least then they know that the motor is brand new... Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5208800 Share on other sites More sharing options...
perzn_34 Posted May 1, 2010 Share Posted May 1, 2010 farrout i could sell my rb25det for around 3k and sell my hks turbo for another 1.5k.. put few more Ks and h3hrwhp wish i had time good luck with sale (Y) Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5208877 Share on other sites More sharing options...
GUN_METAL_GTR32 Posted May 1, 2010 Share Posted May 1, 2010 can u give me all the specs on the turbo, rear housing and wheel sizes cheers Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5208903 Share on other sites More sharing options...
lilmissr32 Posted May 1, 2010 Author Share Posted May 1, 2010 (edited) can u give me all the specs on the turbo, rear housing and wheel sizescheers Sure: Turbo = 714568-1 CHRA = 706451-5 Wheel diameter (inducer) = 61.4mm Wheel diameter (exducer) = 82.0mm Trim = 56 Comp A/R = 0.70 Turbine wheel diameter = 68.0mm Turbine trim = 84 A/R - .82 Type - 4bolt Edited May 1, 2010 by lilmissr32 Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5208911 Share on other sites More sharing options...
a31rb25 Posted May 1, 2010 Share Posted May 1, 2010 price on Greddy plenum by itself? Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5209156 Share on other sites More sharing options...
33skygtst Posted May 1, 2010 Share Posted May 1, 2010 Hi guys,I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane. I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them: BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir hi is the microtech 4 sale and do you know wether they can tune rb25 motors good just curious thankx RADIATOR: Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!) TURBO KIT: Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer, stainless exhaust manifold, Drift air filter & custom pipe from compressor housing INTERCOOLER KIT: 600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum INJECTORS/PLENUM KIT: 870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body ECU/IGNITION KIT: Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads SUSPENION: Tein Super Street coilovers (near new) DRIVELINE: Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff) INTERIOR: eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5209378 Share on other sites More sharing options...
lilmissr32 Posted May 3, 2010 Author Share Posted May 3, 2010 price on Greddy plenum by itself? $900... Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5213418 Share on other sites More sharing options...
lilmissr32 Posted May 6, 2010 Author Share Posted May 6, 2010 ... bump Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5218664 Share on other sites More sharing options...
Nissanclubman Posted May 18, 2010 Share Posted May 18, 2010 Hi guys,I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane. I don't suppose you still have your old Std RB25 pistons? I'm chasing 4 and a set of exh valves. Can you help? 0438526858 Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5240695 Share on other sites More sharing options...
11johnny11 Posted May 19, 2010 Share Posted May 19, 2010 how much for the front mount?? Link to comment https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/#findComment-5243728 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now