Jump to content
SAU Community

Rb25det Parts For Sale

lilmissr32
 Share

Recommended Posts

lilmissr32 Enthusiast

lilmissr32

Posted
Posted

Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them:

BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir

RADIATOR:

Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!)

TURBO KIT:

Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer,

stainless exhaust manifold, Drift air filter & custom pipe from compressor housing

INTERCOOLER KIT:

600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum

INJECTORS/PLENUM KIT:

870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body

ECU/IGNITION KIT:

Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads

SUSPENION:

Tein Super Street coilovers (near new)

DRIVELINE:

Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff)

INTERIOR:

eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount

post-43305-1272500254_thumb.jpg

post-43305-1272500324_thumb.jpg

post-43305-1272500340_thumb.jpg

post-43305-1272500363_thumb.jpg

post-43305-1272500372_thumb.jpg

post-43305-1272500383_thumb.jpg

post-43305-1272500398_thumb.jpg

post-43305-1272500475_thumb.jpg

post-43305-1272500486_thumb.jpg

post-43305-1272500495_thumb.jpg

post-43305-1272500504_thumb.jpg

post-43305-1272500512_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/
Share on other sites
lilmissr32 Enthusiast

lilmissr32

Posted
  • Author
Posted

Prices are as follows:

Built motor: $7000 (head in the process of being freshened up as is the block with new pistons/rings & bearings so will be a totally fresh motor with 0k's on it)

Turbo kit: $2000

Intercooler kit: $400

Injector/Plenum kit: $1700

ECU/Ignition kit: $1750

Coilovers: $1500

Tailshaft: $400

GTR rear end: $800

eBoost2: $500

Gauges/mount: $200

The parts above combined, made 535rwhp on 21psi on pump fuel in my 32...

lilmissr32 Enthusiast

lilmissr32

Posted
  • Author
Posted
if it was in such good condition why is it being 'freshened up'?

... Mark, because I thought it's a good thing to do for the new owner - put in a fresh set of pistons/rings and refresh the head. At least then they know that the motor is brand new...

lilmissr32 Enthusiast

lilmissr32

Posted
  • Author
Posted (edited)
can u give me all the specs on the turbo, rear housing and wheel sizes

cheers

Sure:

Turbo = 714568-1

CHRA = 706451-5

Wheel diameter (inducer) = 61.4mm

Wheel diameter (exducer) = 82.0mm

Trim = 56

Comp A/R = 0.70

Turbine wheel diameter = 68.0mm

Turbine trim = 84

A/R - .82

Type - 4bolt

:(

Edited by lilmissr32
33skygtst Apprentice

33skygtst

Posted
Posted
Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them:

BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir

hi is the microtech 4 sale and do you know wether they can tune rb25 motors good just curious thankx

RADIATOR:

Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!)

TURBO KIT:

Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer,

stainless exhaust manifold, Drift air filter & custom pipe from compressor housing

INTERCOOLER KIT:

600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum

INJECTORS/PLENUM KIT:

870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body

ECU/IGNITION KIT:

Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads

SUSPENION:

Tein Super Street coilovers (near new)

DRIVELINE:

Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff)

INTERIOR:

eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount

  • 2 weeks later...
Nissanclubman Rookie

Nissanclubman

Posted
Posted
Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I don't suppose you still have your old Std RB25 pistons? I'm chasing 4 and a set of exh valves. Can you help? 0438526858

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...