Rb25det Parts For Sale

[lilmissr32]

Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them:

BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir

RADIATOR:

Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!)

TURBO KIT:

Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer,

stainless exhaust manifold, Drift air filter & custom pipe from compressor housing

INTERCOOLER KIT:

600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum

INJECTORS/PLENUM KIT:

870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body

ECU/IGNITION KIT:

Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads

SUSPENION:

Tein Super Street coilovers (near new)

DRIVELINE:

Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff)

INTERIOR:

eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount

[eXquiSit]

what lsd is in the gtr diff?

[zebra]

how much for the x6 box and coils? and does it have all the wiring?

[Luke_GTS-T]

prices?

[lilmissr32]

Prices are in next post below!

Edited April 29, 2010 by lilmissr32

[lilmissr32]

Prices are as follows:

Built motor: $7000 (head in the process of being freshened up as is the block with new pistons/rings & bearings so will be a totally fresh motor with 0k's on it)

Turbo kit: $2000

Intercooler kit: $400

Injector/Plenum kit: $1700

ECU/Ignition kit: $1750

Coilovers: $1500

Tailshaft: $400

GTR rear end: $800

eBoost2: $500

Gauges/mount: $200

The parts above combined, made 535rwhp on 21psi on pump fuel in my 32...

[lilmissr32]

what lsd is in the gtr diff?

The diff is sold, sorry.

[eXquiSit]

The diff is sold, sorry.

no worries

can i ask how much did it go for?

and what lsd was in it?

thanks!

=)

[lilmissr32]

no worries

can i ask how much did it go for?

and what lsd was in it?

thanks!

=)

It was a stock 2-way mechanical diff!

It sold for $550

[45ULT]

if it was in such good condition why is it being 'freshened up'?

[lilmissr32]

if it was in such good condition why is it being 'freshened up'?

... Mark, because I thought it's a good thing to do for the new owner - put in a fresh set of pistons/rings and refresh the head. At least then they know that the motor is brand new...

[perzn_34]

farrout i could sell my rb25det for around 3k and sell my hks turbo for another 1.5k.. put few more Ks and h3hrwhp

wish i had time

good luck with sale (Y)

[GUN_METAL_GTR32]

can u give me all the specs on the turbo, rear housing and wheel sizes

cheers

[lilmissr32]

can u give me all the specs on the turbo, rear housing and wheel sizes

cheers

Sure:

Turbo = 714568-1

CHRA = 706451-5

Wheel diameter (inducer) = 61.4mm

Wheel diameter (exducer) = 82.0mm

Trim = 56

Comp A/R = 0.70

Turbine wheel diameter = 68.0mm

Turbine trim = 84

A/R - .82

Type - 4bolt

Edited May 1, 2010 by lilmissr32

[a31rb25]

price on Greddy plenum by itself?

[33skygtst]

Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them:

BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir

hi is the microtech 4 sale and do you know wether they can tune rb25 motors good just curious thankx

RADIATOR:

Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!)

TURBO KIT:

Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer,

stainless exhaust manifold, Drift air filter & custom pipe from compressor housing

INTERCOOLER KIT:

600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum

INJECTORS/PLENUM KIT:

870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body

ECU/IGNITION KIT:

Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads

SUSPENION:

Tein Super Street coilovers (near new)

DRIVELINE:

Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff)

INTERIOR:

eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount

[lilmissr32]

price on Greddy plenum by itself?

$900...

[lilmissr32]

... bump

[Nissanclubman]

Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I don't suppose you still have your old Std RB25 pistons? I'm chasing 4 and a set of exh valves. Can you help? 0438526858

[11johnny11]

how much for the front mount??