Jump to content
SAU Community

Recommended Posts

Thanks David

No worries.

Like I said that is an approximate. Know of several (four other members!) others who have cc'd their heads and got 62cc or there abouts. Its fairly accurate "approximation" to assume yours will be the same.

If you're shooting for 9:1, just make sure your builder/assembler knows this and machines the assembly accordingly.

I think its weird that its not more commonly known (the chamber volumes)

I guess it comes down to not many people touching the heads on RBs and simply throw a bigger turbo and more boost at it to make power.

This also relates to CP/Weisco etc labling the comp ratios for pistons straight out of the box.

No worries.

Like I said that is an approximate. Know of several (four other members!) others who have cc'd their heads and got 62cc or there abouts. Its fairly accurate "approximation" to assume yours will be the same.

If you're shooting for 9:1, just make sure your builder/assembler knows this and machines the assembly accordingly.

wildo, costing me enough as it is, dont want to risk phucking it up. . :thumbsup:

Rb25 & rb26 I've seen all varied from 62-67. Neo's from 52-56. The first 20 thou ground off an un machined 25 & 26 head removes exactly 2CC's and it always varies from there

piston to deck heights varied too,

rb30 with rb25/26 pistons 10 - 40 under

rb30de pistons 20 thou under to 10 thou above

5 thou above will usually add .25 to the comp ratio

a 1.8 gasket replacing a 1.2 can lower the comp by around 0.75

  • 2 months later...

My RB30DET is running,

modified r33 25 head, drilled oil returns, welded water and vct, 20 inlet cam, 25 exhuast cam, full reco and skim.

RB30 block, drilled oil returns, drilled & taped tensioner, 1.0mm oil restristors, deburred and honed.

RB30 crank, grub screwed & crank collar, linish and balance.

RB30E std piston and rod, new rings, acl race bearings,

Cometic 1.2 MLS head gasket, genuine nissan gasket set.

N1 oil & water pumps, dayco 94407 timing belt, 2x tensioners.

Garret GT3071r 3037s 56t .63. ebay hi mount, tial 38mm gate, nismo 750cc, Freddy, apexi pfc, 3x pumps.

Heaps of Torque & 12psi @ 2500rpm :whistling:

Next: E85, reposition wastegate & tune

Edited by RED513

So just as I finish sorting out all the teething problems of the new setup and was thinking of booking it in for a tune.. some dumbass P-plater tries to make the gap and failed hard :(

The old girls heart will beat again soon, hopefully in the body of a sexy young 34 :whistling:

post-31803-0-66439500-1324344558_thumb.jpg

post-31803-0-09321800-1324344625_thumb.jpg

  • 3 weeks later...

New engine has just been tuned. I have a nice 300rwkw tune for pump fuel as thats plenty for the street. And a 475rwkw E85 tune at only 24psi as that seems the be the limit of my exhaust system.

It makes 180rwkw @ 4000 and 360rwkw by 4500 so things get fun pretty quick.

Just need a 4" system and a less restrictive muffler and should make more but this will do for now :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...