Jump to content
SAU Community

Recommended Posts

I think everyones circumstances are different. If you're debating whether to go N/A or turbo, no one can really tell you what's best for you - that's something you'll have to decide for yourself.

For me personally, I chose the N/A route because at the time power wasn't my highest priority. Choosing N/A mean't I could get a better car for my money, more importantly I could get THE car I wanted for my budget. With N/A I also got the added (and welcomed) bonus of:

Cheaper Insurance

cheaper on fuel

and it's less likely something will go BANG! :)

The downsides are obvious - less power and less modifying potential.

Do I regret going N/A? Nope. But my next car will be turbo'd...:)

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-642350
Share on other sites

Hmm my choice was based on looks more than power...when I bought my 34 back in 2002 the prices were still high...so N/A was as far as the budget could stretch. But it's getting a turbo put on next week, so I'm going to be happy with the end result anyway :P

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-642422
Share on other sites

i agree, there are plenty of reason to go N/A - Insurance, not so much initial purchase cost, but certainly the quality of the car you get for your money. of course, once your over the initial thrill of your first skyline, you come to realise why the make turbo cars... and then you gotta have one !

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-643363
Share on other sites

yeah i was wondering about that, because i got the feel from some of the posts that people bought an N/A skyline and that sticking a turbo in the engine was something to do when they have enough money.

but i was reading about this guy who as a project is trying to get as much power out of his skyline without using a turbo, so there must be fans.

i'm sure my first car will be naturally asperated, financially but also so i wont kill myself as easily........

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-643419
Share on other sites

also u get owned at the lights

probably find that NA is a favorite amongest younger drivers money wise (yes we want fast cars with big turbos) but in the end the insurance could quite possibly be more than the car. Also you find some people (like dan) end up putting turbo on it anyway, yes its cheaper just to sell the car and buy a turbo one but after owning it for so many months or years you just fall in love with the car and it would be hard to let it go.

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-643470
Share on other sites

I was keen to get a turbo but my parents stopped me. I'm happy with my n/a though :) Sure its a bit slow in a straight line but its still quick enough to rape my mates cars and it handles just as well as its turbo sibling (if not better; less weight). Insurance only marginally better than a turbo, it wasn't a deciding factor. Oh yeah and in Vic the n/a meets the power to weight ratio of 125kw per tonne for p platers, so its good to know you're legal!

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-644256
Share on other sites

You guys actually have restrictions on the power of cars p platers drive!? man, that is the best idea ive heard in a while - there aren't many p platers (or even after that) who can safely handle big horsepower cars. Should be a requirement to pass advanced driver training courses to be able to drive them - better for all of us then - don't kill people, but more important, no writen off cars ! :)

back to the point though, i know what you mean greg, about maybe losing out a bit in a straight line, but pretty much any other car (except the turbo guys of the same) gets left in the dust (or smoke) at the first corner. then again at the second.... and third.... and.... well, you get the point.

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-645323
Share on other sites

yep N/A certainly have distinctive note - specially intake draw. Exhaust can become a bit tiresome on long trips though - Dan, what is that baffle your talking about. I'd have thought you'd need to change entire zorst systems to get them quieter?

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-647074
Share on other sites

GenesisR32 - Yep the car is now in getting all the fruit stuck to the engine, I'll have it my hands by the long weekend...what a wait I can tell you!

pstanbis - Did you mean Dave when talking about the baffle? Either way I used to have the same exhaust as Dave, managed to pull 113db at 4500rpm....let's just say it's one mean exhaust, sounds damn good! The baffle just extends the exhaust pipe through the resonating tip, just tones it down a bit.

If you want to get noticed get this exhaust! LOL

Dan

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-647122
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...