Jump to content
SAU Community

Recommended Posts

Was constantly worrying about my car's exhaust getting EPA-ed since i am always moving in and out of the city pretty often, and truely recieved one just a couple of days ago. :D

I don't wanna keep worrying about getting EPA-ed nor do i have the time to waste going around to clear the EPA.

I am seeking help or recommendation for an aftermarket exhaust system which would pass EPA, and something that i can stick on my car for good. And preferably also a workshop that i can get it fixed. Am located in North Melb.

Am not really worried about performance, would like a nice tone that will clear EPA without having to swap out to the stockie. So any recommendations will be much appreciated :P

Link to comment
https://www.sau.com.au/forums/topic/319524-recommend-exhaust-for-r34-gtt/
Share on other sites

This has been covered MANY times. I had an R34GTT and ran a Fujitsubo Legalis system. It was great for power and passes EPA also - I know as I had it done. I was running 3" from the turbo back too and still passed :D

http://www.nengun.com/fujitsubo/legalis-r

Looked nice enough too -

2471023_2.jpg

I'm sure there are local systems around though. Others will comment.

adzmax.

thanx i saw your recommendation on that in previous threads, but that was a couple of years ago.

am unsure if new systems are out :D

anyway thanks, have a few questions regarding that and will direct it into your mailbox.

Fujitsubo 3" turbo back is what I got n what most r34s come over here with from what I've seen. They r nce n mild and will pass EPA unless ur unlucky like me n get tested in an underground carpark lol but yeh definatly get that

Wow, I like your car, very clean and well styled. +1

This has been covered MANY times. I had an R34GTT and ran a Fujitsubo Legalis system. It was great for power and passes EPA also - I know as I had it done. I was running 3" from the turbo back too and still passed :P

http://www.nengun.com/fujitsubo/legalis-r

Looked nice enough too -

2471023_2.jpg

I'm sure there are local systems around though. Others will comment.

Trust PE2, very quiet on idle and cruising (and thats 3" turbo back)

Very nice note when flooring it. Looks good as well.

.

would it still be quiet at 4800 rpm?

thats what rev we need to be at and measured for EPA

most people would recommend a pe2 for its quiet yet nice bark on load, but i would definetely recommend somehting bigger and less restrictive for a 300kw+ setup if thats wat ur looking for.

if you a size 8 shoe, you buy a 9 to let yourself grow into them. same rule applies for modified cars.......for me at least.

Hi Jap Muscle~

I don't have a 300kw+ setup, mine is stock :thumbsup: Not looking to readily modify the car as of yet, due to time restriction.

other than a 3" turbo back piping with a 5" cannon at the end. I failed the noise emission because when backing off the accelerator it echos off the 5". so right now, something nice and would meet legal requirements would be splendid for me :thumbsup:

anyway UPDATES for the thread,

have gave themufflerman a ring, and set a date to go down on wednesday... will be back to this thread for updates :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...