Jump to content
SAU Community

Recommended Posts

Hi Guys

last week i noticed this for the first time, i drove from Newcastle to Port, went through some hills and my car started to splutter and loose power now this was new to me as it wasn't a missfire as such but more of a sruggle to make power then die.

i have worked at Port all week and the car has been fine, not a drama. i gave it a boot afew times and nothing. Now last night i drove to Coffs and it was fine but today i was giving it a little and about 15mins latter it spluttered and died in the middle of a round a bout mind you lol.

It seems to happen when the car is hot, could this be spark plugs/coil packs? at first i thought fuel pump but it's been fine all week.

it's really wierd.

Mods: front mount

3.5inch exaust

Standard turbo

Boost controller running 10psi

coil packs are stock but siliconed

i pulled the plugs out thisarvo and they have the usual blackness and coil packs look okay.

Any ideas?

Cheers

Cam

Link to comment
https://www.sau.com.au/forums/topic/319804-problem-with-r33-gts-t/
Share on other sites

ok, if it is the CAS will this slowly get worse? can this be easy tested to see if it is? and how much roughly to fix?

at this stage with work i don't have the time to fix but need my car, if it's easy to do yourself i will do it.

i drove it today for about 5mins just to see if it would go, it seems to be when it gets hot it does it

cheers for the help guy

Cam

well the known baddie you have is the taped/botched coilpacks

you already know these were causing an issue last time as you have repaired them

so the most likely culprit is the coilpacks - i can't understand how the CAS is at fault, unless it has come loose

how often does a CAS fail? i cant recall a single CAS Failure? it seems in the last two weeks everyone posts "CAS" is at fault. check the basics. check your coilpacks, check base timing at idle (that would confirm if CAS is toast or not)

If it died in the middle of the round a bout then i'd say CAS.

Won't be coil packs.

CAS's play up in some fken weird ways. Car can be fine for a week and randomly die, and then it might die twice in the next hour and then be fine again for another week.

My CAS when it was failing did exactly that - made it a bastard to diagnose

Ahuh...cheers..i always figured it was a sensor of some sort causing it, it only really happens when cars been undriven for a while, if i give it a bit of a flogging it always corrected itself...

So what would be wrong with it, or does it just need replacing?

  • 2 weeks later...
  • 2 months later...

Hi guys, thought I would let you know the diagnosis of my problem. Turns out it was a faulty airflow meter, yep the symptoms matched what you guys were saying about the Cas had it looked at didn't find nothing, when it did it again we put the computer on it and yay. So take note the airflow meter can cause similar issues, and after a new set of coil packs, plugs, I even got a cas. thank god we got there

cam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
    • Yeah. OK. I'll say the same thing I say to everyone. You do not have to use 100% throttle all the time.
×
×
  • Create New...