Jump to content
SAU Community

Recommended Posts

It's quite surprising what they do and don't know about vehicles when inspecting...when I had a cop inspecting my engine bay I was thinking to myself "there's so much I could teach you about looking for faults" lol. Yet they look in kick panels for aftermarket ECUs...

You sir, have never had the Knox TMU on your tail :)

Wanker or not, you don't always get left to your own devices but I agree you have much more chance of getting pulled over when you are driving like a wanker.

^^^

Thats right, I got pulled over driving like a grandma doing 75 in an 80 zone along Burwood Hwy. Cop gave my the car a very thorough inspection asking why are the wastegates silver instead of the stock bronze colour and asking about the engine management if it was a Apexi PFC or Motec etc. My car and engine bay look very standard and in the end he got me for a boost controller. He also went through the inside of my car looking for the ECU and EBC. This particular cop knew more than enough to pick anything unusual (illegal mods) and by the way listing parts and giving me advice on my mods he was definitely very knowledgeable on the car front. My advice would be to make it look as stock as possible and hide anything illegal as well as you possibly can and avoid driving around these areas (knox, dandenong etc) on Friday / Saturday nights, good luck.

It's nice that they don't take into consideration the fact you were driving sensibly/sedately at the time of pulling you over for inspection, unlike, I don't know, 90% of the other cars on the road. Did he have you blocking a lane on Burwood Highway for the inspection too?

Paint the injectors the same colour as the stock ones....And if the cop finds something illegal eg PFC, EBC.. Just pull a gun on him, blow his brains out and get out of there fast..I heard that works well in America..

It's nice that they don't take into consideration the fact you were driving sensibly/sedately at the time of pulling you over for inspection, unlike, I don't know, 90% of the other cars on the road. Did he have you blocking a lane on Burwood Highway for the inspection too?

Yeah it was real nice of him. I guess he had nothing better to do. I would have blocked off a lane on Burwood Hwy, but I pulled over on High street road into a bus turn off for that very reason. Definitely won't be driving around that area at night again. Been a nightmare having to get / pay for all the stock components for the EPA.

thats the petite guy in knox area. ive heard he owns a evo him self, and also one of his family members died in a drag race so he promised him self to nail down as many imports as he can the kantt..

thats the petite guy in knox area. ive heard he owns a evo him self, and also one of his family members died in a drag race so he promised him self to nail down as many imports as he can the kantt..

let the pettit rumours begin..

i hear his dog got run over by an import while it was poopin on a nature strip and the guy lost it sideways in a residential street.. so he promised to take it out on every import he sees...could be wrong though

Yeah it was real nice of him. I guess he had nothing better to do. I would have blocked off a lane on Burwood Hwy, but I pulled over on High street road into a bus turn off for that very reason. Definitely won't be driving around that area at night again. Been a nightmare having to get / pay for all the stock components for the EPA.

Have you cleared the EPA yet?

man up and run the larger turbo, make sure you sure use a low mount manifold. heat coat the turbo, leave the stock heat shield on (if any?).

another words, do it and hide it. if the engine bay looks like a race car, you ll get pwned, if it looks stock you should be fine.

i saw a cop checking over a friends skyline, even looked at the turbo, completely missed it was a HKS turbo.

in summary, basically every mod is illegal these days.

Edited by Peter89
thats the petite guy in knox area. ive heard he owns a evo him self, and also one of his family members died in a drag race so he promised him self to nail down as many imports as he can the kantt..

LOL. Petite rumours...the old wives tails of the import scene.

And it's not always Petite...not unlike Senator Palpatine he has since trained a few apprentices in the dark arts.

LOL. Petite rumours...the old wives tails of the import scene.

And it's not always Petite...not unlike Senator Palpatine he has since trained a few apprentices in the dark arts.

Top call Birds. I find it so amusing that Petit is the whipping boy of of SAU Vic and most of us have probably never met him :thumbsup:

Have you cleared the EPA yet?

Nah mate not yet :D. I just found the stock exhaust and it was the last part i needed to get. So now i'll work on putting back what I can myself and then save up a bit to pay someone to do the rest. Hopefully sorted by the end of this month. Its killing me not being able to drive it. Did you get your beast fixed up from the GOR cruise?

Nah mate not yet :D . I just found the stock exhaust and it was the last part i needed to get. So now i'll work on putting back what I can myself and then save up a bit to pay someone to do the rest. Hopefully sorted by the end of this month. Its killing me not being able to drive it. Did you get your beast fixed up from the GOR cruise?

Man, EPA is a bitch hey?

Yes it's fixed from my GOR 'mishap' it was a damn clamp that broke, my wallet sure did copped a beating!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...