Jump to content
SAU Community

Recommended Posts

As the title says

I need a tuner in the gold coast area to tune the AFCneo i have just purchased and also do i need wideband 02 sensor and controller or just the sensor? (sorry if thats a dumb question, i dont know much about this)

I dont wanna hear about how i should have spent my money on a stand alone ECU. This will come later (in the form of a haltech :3some: )

This is a temporary solution to sort out the excessive fuel consumption and inconsistent performance of my daily driver.

Cheers! in advance for any advice!

Link to comment
https://www.sau.com.au/forums/topic/320197-apexi-afc-neo-tune/
Share on other sites

you need someone who knows how to tune the AFC neo (or you can try it yourself)

you need a dyno to simulate load

you need a wideband sensor and a wideband sensor reader/controller/guage

if you have all of those a tuner can do it for you or you can do it yourself

you need the wideband sensor which goes up the exhaust (at muffler is OK) and then a unit to display the AF/R from the sensor

ie you cant plug the sensor into nothing or the stock ecu or the AFC, it needs to go into a wideband controller/AFR guage (not a $50 autobarn one)

the wideband sensor and reader/controller thingy should set you back around $300 if you have to buy it, so best to find a tuner who has one

you need someone who knows how to tune the AFC neo (or you can try it yourself)

you need a dyno to simulate load

you need a wideband sensor and a wideband sensor reader/controller/guage

if you have all of those a tuner can do it for you or you can do it yourself

you need the wideband sensor which goes up the exhaust (at muffler is OK) and then a unit to display the AF/R from the sensor

ie you cant plug the sensor into nothing or the stock ecu or the AFC, it needs to go into a wideband controller/AFR guage (not a $50 autobarn one)

the wideband sensor and reader/controller thingy should set you back around $300 if you have to buy it, so best to find a tuner who has one

Ok excellent, Thanks for that info.

So let me get this straight, I only need a wideband kit if I am tuning myself or the tuner doesn't have one?, in which case I wouldn't go to that tuner as you would expect a good tuner to have all that anyway.

I don't really believe in playing with my cars tuning without the proper training/experience so I will be using an experienced tuner anyway, probably someone like Matty Spry, EFI or Gavin Wood.

i know you didn't want people to say this, but you should've gone with something like a nistune. it would've cost roughly the same as what you will end up paying to buy the AFC and get it tuned but give you better results. plenty of places will do it drive in, drive out for under $1000.

i know you didn't want people to say this, but you should've gone with something like a nistune. it would've cost roughly the same as what you will end up paying to buy the AFC and get it tuned but give you better results. plenty of places will do it drive in, drive out for under $1000.

Are you serious?

Becasuse you have no idea what my future mods entail. Why spend $800+ on a nistune now only to hav to do it all again when I finish my upgrades?

Now i've wasted 10 minutes of my day having to justify why I dont want to hear opinions about 'how wrong it is to use an SAFC'.

each to their own 'eh.

And i'll have you know I scored the neo for $300 of a mate. I will be able to recoup most if not all of that down the track...

Are you serious?

Becasuse you have no idea what my future mods entail. Why spend $800+ on a nistune now only to hav to do it all again when I finish my upgrades?

Now i've wasted 10 minutes of my day having to justify why I dont want to hear opinions about 'how wrong it is to use an SAFC'.

each to their own 'eh.

And i'll have you know I scored the neo for $300 of a mate. I will be able to recoup most if not all of that down the track...

because down the track you can simply go and get the nistune retuned for a few hundred dollars. so the afc cost you $300, and lets say another $200 or $300 to get it tuned. so about $600. then down the track you sell it for $300 again (they aren't worth much these days) and then pay $1500 for something like a pfc and then another $300 or $400 for a tune. you are out of pocket a total of around $2500. if you had gone the nistune from the start you may pay an extra $100 or $200 to start with, but then when you upgrade the turbo, etc, it will only cost you another few hundred to get the tune altered, so all up you'd come out about $1000 better off.

also the initial tune would get you better power from the nistune. with the AFC you may start to get the engine pinging before you get to the optimum AFRs, because it is simply bending the signal from the afm, which will alter the timing as well as the AFRs both at the same time. you can't seperatly control them.

because down the track you can simply go and get the nistune retuned for a few hundred dollars. so the afc cost you $300, and lets say another $200 or $300 to get it tuned. so about $600. then down the track you sell it for $300 again (they aren't worth much these days) and then pay $1500 for something like a pfc and then another $300 or $400 for a tune. you are out of pocket a total of around $2500. if you had gone the nistune from the start you may pay an extra $100 or $200 to start with, but then when you upgrade the turbo, etc, it will only cost you another few hundred to get the tune altered, so all up you'd come out about $1000 better off.

also the initial tune would get you better power from the nistune. with the AFC you may start to get the engine pinging before you get to the optimum AFRs, because it is simply bending the signal from the afm, which will alter the timing as well as the AFRs both at the same time. you can't seperatly control them.

Why is it that you 'nistune' people have to hi-jack everyone's topics and crap on with your rlentless speel about how superior nistune is.

I DO NOT WANT TO USE NISTUNE! :P

I am sick of myself having to justify my reasons for this.

This is why i said at the start 'I dont wanna hear about stand alone's and blah bla blah'.

If you don't have an answer for the qustions I have ask then dont post.

By the way, have a good look around and you can get Haltech Platinum Pro Plug-in for RB's for $1800.

Why spend nearly the same money on a PFC or anything else really?

Nistune is something like $357.

Sell the neo and buy a nistune...then you can get a proper tune.

No it isn't. You may want to have a look into it.

Its about $800-$900 as far as i am aware.

Ummm unlkess you chasing 600rwhp or more nistune will be fine

I have my reasons for wanting to use haltech.

How do you know i'm not chasing 600rwhp down the track?

Any love for Haltech?

As I have said,

I am on an absolutely tight, shoestring budget just to live and get by.

I need my car running o.k so I can still get to work and earn my shoestring wage,

without the excessive fuel bill every 4-5 days hence why i am using the neo.

My complete stage a tuning will not be performed for some time and i simply can't justify spending anymore that I already am. On top of this my fornt end is fairly smashed up so i need to focus on saving for paint&panel work to avoid getting undesired attention and its comming up to big service time i.e timing belt&tensioners, water pump etc. and the list goes on.

I will install the AFC myself so, $300 for the neo, say $250 for tune=reliable car to get from A-B.

The money I could have spent on a 'nistune' will go on servicing, brakes and rego, once again, to keep the car safe, reliable and legal(as much as possible).

There i go, trying to justify to people why I have made these decisions.

So how about we stay on topic?..... :laugh:

original question

do you need a wideband

the person tuning your car NEEDS to use a wideband o2.

if you are tuning your car, then you need a wideband o2 sensor and gauge.

if you are getting someone else to tune your car, then they need a wideband o2.

/end thread

Thats all I needed to hear.

Thanks mate muchly appreciated.

Any body?

C'mon simple questions

Gavin Woods, Autotech, 5529 2313 . Gibbs St . Labrador, not sure of the St No, these guys know the stuff.when it comes to Skylines (and REXs and performance) :P

Edited by BASHO

I have a neo if you need any help pm me

Im also amazed at how much nistune is

For 300 bucks i can get a generic stage one stock ecu remap.

Simple plug and play on an exchange basis that smooths out the four to five k flat spot, returns better fuel econamy and gives on average 330bhp i have seen 350bhp.

I have a neo if you need any help pm me

Im also amazed at how much nistune is

For 300 bucks i can get a generic stage one stock ecu remap.

Simple plug and play on an exchange basis that smooths out the four to five k flat spot, returns better fuel econamy and gives on average 330bhp i have seen 350bhp.

Excellent thanks dude, much appreciated.

I have a neo if you need any help pm me

Im also amazed at how much nistune is

For 300 bucks i can get a generic stage one stock ecu remap.

Simple plug and play on an exchange basis that smooths out the four to five k flat spot, returns better fuel econamy and gives on average 330bhp i have seen 350bhp.

I'm interested in this one, where abouts is this one done ? --a contact would be great ;)

Why is it that you 'nistune' people have to hi-jack everyone's topics and crap on with your rlentless speel about how superior nistune is.

I DO NOT WANT TO USE NISTUNE! :)

I am sick of myself having to justify my reasons for this.

This is why i said at the start 'I dont wanna hear about stand alone's and blah bla blah'.

If you don't have an answer for the qustions I have ask then dont post.

By the way, have a good look around and you can get Haltech Platinum Pro Plug-in for RB's for $1800.

Why spend nearly the same money on a PFC or anything else really?

No it isn't. You may want to have a look into it.

Its about $800-$900 as far as i am aware.

I have my reasons for wanting to use haltech.

How do you know i'm not chasing 600rwhp down the track?

Any love for Haltech?

As I have said,

I am on an absolutely tight, shoestring budget just to live and get by.

I need my car running o.k so I can still get to work and earn my shoestring wage,

without the excessive fuel bill every 4-5 days hence why i am using the neo.

My complete stage a tuning will not be performed for some time and i simply can't justify spending anymore that I already am. On top of this my fornt end is fairly smashed up so i need to focus on saving for paint&panel work to avoid getting undesired attention and its comming up to big service time i.e timing belt&tensioners, water pump etc. and the list goes on.

I will install the AFC myself so, $300 for the neo, say $250 for tune=reliable car to get from A-B.

The money I could have spent on a 'nistune' will go on servicing, brakes and rego, once again, to keep the car safe, reliable and legal(as much as possible).

There i go, trying to justify to people why I have made these decisions.

So how about we stay on topic?..... :)

that will be for the nistune and tuning. the nistune board itself (with fitting) is only about $310.

and the reason why we go on about it being superior is that because for only a small amount more than what you are spending on a AFC you could get an ECU that doesn't just allow minor altering of the AFM signal where you end up with a compromised power increase. the gains from the nistune will not only give you a higher max power, but also give much more power in the low and midrange, making it better to drive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...