Jump to content
SAU Community

Recommended Posts

hey guys,

visited the guys down at traction tyres a while ago and have just saved up enough money for a decent suspension kit. the car is currently running 322rwkw with a aim to push up to 400rwkw once ive sorted out supporting mods ect.

my question is does anyone have experience with pedders new extreme kit?

more info: http://www.pedders.com.au/products/52

i know alot of people tend to stick to the jap stuff and 7/10 it is the wrong choice because aussie roads aint like the japs. i would like something comfy but im more then happy to sacrifice that for traction.

my understanding has always been coilovers are hard which isnt good for rwd traction but ive never really owned a set so any help would be great. cheers!

Link to comment
https://www.sau.com.au/forums/topic/320953-pedders-coilover-extreme-kits/
Share on other sites

Hey Mate,

Have not had personal experience with them.... but have received an expensive quote for a set of their rider coilovers... $2000 !!

Also have heard bad feedback from other people.... Mainly complaining about the price though..... not so much about quality

Cheers!

:) I put Pedders extreme coilovers on a WRX about 6 years ago when they were doing a special deal campaign in conjunction with Fast Fours and got the set for about $1650.00 inc fitting.

I particularly recall this excercise as true to the adds I got the deal done.-----------BUT-------------------

The suspension shop in Coffs (a Pedders Agent) who fitted them made such a shitty job of the install I had to take the car back to them to be fixed and they chargrd me another $380.00 to set the things up again.

I was a lot more naive then and paid, these days I would have just shot them.

As to the actual coilovers I recall they were a little on the hard side , good for track certainly but a bit tough for street and there was no damper adjustment, I saw the car about 15 months after I'd sold it and it had put on an obviously hard 40.000ks and the coilovers still appeared good.

Buy them again--?-- not without damper adjustment if I was going to use them on the street.

Hey guys. Got a set of pedders extremes on my car. Wouldve picked sumting else, but my mate works there and I know the owner. Got it pretty good price. It is a bit of a stiff ride, but it goes awesome round corners. IMO, not bad if u get it at a reasonable price. I'm satisfied enuf to still have it on my 33 2 years later

i was quoted 1600 from the good guys at traction tyres which i completely trust and have never heard a bad thimg about them. it seems that pedders gets a bad name from their fittets rather then their product.

for those of you who dislike pedders, what do you recommend? tein super streets seem to be popular but like i said im after traction 1st then comfort

  • 4 weeks later...

just got off the phone with some of the representatives @ pedders and it seems that the spring rates in the pedders are extremely high!! at least for what i want the car to do.

something like 6kg/mm in the rears compared to 4kg/mm that the Super Streets have. also found out that the pedders kits dont come with upper pillar mounts to adjust camber....=[

For that money I'd be recommending the BC Racing ones from Just Jap. I got the ones with the external resovoirs so you can adjust the dampers rebound and compression seperately. Plus I've heard they're actually made in the same factory as greddys coilovers. Spring rates are 8f 6r and come with pillow top mounts if your car supports them

Re-branded and expensive.

Re-branded what?

Pedders have always been expensive, no surprises there. I worked at Pedders for nearly 3years and while I'd buy other stuff now for the price differences, I put a full kit of stuff into the falcon I had when I worked there and it's still performing well 6 years or so later.

Pedders get a bad wrap which I think is not always warrented.

Anyway, I would recommend the BC Racing coilovers for the price. I just put some BC BR's in a mates 33 and I like them. Standard they come with 8kg front and 6kg rear spring rates but you can order them from justjap with just about what ever spring rates you want.

Tein SuperStreet kits come with 4kg front and rear spring rates and Tein SuperDrift kits come with 7kg front and rear spring rates. The Tein kits are known for being very comfortable, and they are, both of those kits were designed by Tein japan in conjunction with a tech from Fulcrum to be more aimed at Australia's rubbish roads.

I currently have Tein type HA jap spec coilovers in my R33 which are old japanese coilovers and have 9kg front and 8kg rear spring rates. They are too hard for Australian roads, not very comfortable at all. I'll be most likely changing them for a set of BC BR's with 8kg front and 7kg rear spring rates in the near future.

Hope some of that info helps.

thanks for the advice Tim.

ive heard that the extreme kits are BuddyClub stuff but i cant confirm that. in terms of what you currently have 9kg and 8kg sounds super stiff. are you hooking up with traction at all?

in a RWD car id try to keep it as close to OEM spring rates as possible.....why do people go so hard?

in terms of price atm the super streets are the most expensive sitting at $2300 followed by pedders then BC with 1500, 1200 respectively. has anyone looked into custom bilstein shocks with custom springs? expensive?

id be looking at something with high damper valving and low rebound valving, which is usally a problem because in coilovers you can only adjust both at the same time which isnt ideal for drag

Edited by Jap_Muscle

What you really need jap muscle is the BC coilovers that pistol-pete is talking about. You can adjust valving in both directions separate of each other.

My car doesn't have much traction as it is without big tyres but I'm not a drag racer, I'm into drift so the spring rates I've got now work for me now until I get some bigger sway bars and drop the spring rates in order to make it more comfortable on the street but still handle well.

What you really need jap muscle is the BC coilovers that pistol-pete is talking about. You can adjust valving in both directions separate of each other.

My car doesn't have much traction as it is without big tyres but I'm not a drag racer, I'm into drift so the spring rates I've got now work for me now until I get some bigger sway bars and drop the spring rates in order to make it more comfortable on the street but still handle well.

sounds great but i had a look on the justjap website and they didnt list any diff spring rates. do you know if the BC kits have upper piller mounts? any thoughts on where to get diff spring rates?

yeh your car sounds like its got wat it needs, damn drifters and their high spring rates. makes my ass numb :blink:

edit::

just had a look at the justjap website again and it dosnt look like they have the ER version of the coilovers. ill have to give BC direct a call to see if they have them =[

Edited by Jap_Muscle

The guys at JustJap are pretty good to deal with, in my experience. I deal with them a bit at work.

If they don't get back to you within 24 hours, give them another call and remind them about the email you sent.

well i had a chat to justjap and they have informed me that BC-Racing are not interested in making spring rates other then what they sell. quite a let down especially what they offer are only 7kg/6kg front and rear.

wayyyyyy to hard for the drags. looks like ill have to go custom koni/bilstein with king springs of some sort.

Koni and whilteline springs i have heard a are great i have them sitting in my garage to put into my car but just bought HSD HR coilovers and have a few freinds running them and they are feel great!

and i highly doubt that pedders are buddyclub!!! i wont buy anything from pedders they already stung me on pushing 2 front wheel bearings in i took them there with one already half out $180 dollars later wasnt happy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...