Jump to content
SAU Community

Recommended Posts

Guys i was looking into some pod yesterday, was thinking of which pod actually suit me better for my 33 until i saw an article about 3A racing pod. I believe you guys know its a cheap pod and probably can get it from supercheap or repco. amazingly the 3A racing pod do better than any pod that we are using today like apexi, hks, and more famous brands. below is a link to show you the magic of these pod! Its a short article but with fancy pictures so will not be boring, starting today change your pod filters to 3A racing pod lol.

Go to

http://www.3aracing.com.au/HTML%20Folder/0...erShootOut.html

Click

Read Article

Link to comment
https://www.sau.com.au/forums/topic/321542-unbelieveable-3a-racing-pod/
Share on other sites

what a joke .

what is the piont of a FILTER . to FILTER particles out of the air that damage your engine . get something that filters properly and if you can prove on the dyno it is a restriction get a bigger filter untill it is not

having plenty of experience with filters on moto x bikes the general consesus is oiled cotton and oiled foam are on par with each other while clean but when dirty the k&n will outflow the foam ones due to more surface area

although rush goes some way towards fixing this with its contoued outer surface

http://www.uniflow.com.au/contents/media/A...sh%20Filter.jpg

Years ago Xspeed tested all the big name Filters on my Dyno, the $20 dollar specials were the highest power outputs and now afte all the years theres been no damage from poor filtration. Many of the mega Dollar stainless mesh big name jobs catch small animals and rocks and nothing else.

dont know with you other guys that are running these filters, do yous have really loud induction noise and some flutter too. with my 180 i have this filter and sounds like the turbo is spooling up and its not even boosting, sounds cool tho.

Yeh i personally don't believe it. I take these tests with as much seriousness as tests of flow on catalytic converters. It is very easy to over clock the flow rate and then quote the filter rate at the bench flow rate. Everybody looks at the flow rate and goes oh wow it MUST be good, but then don't stop to think that the quoted filterage could be taken at a lower flow rate.

I used to have a 3A filter on my car. Replaced it with an Apexi and i could definitely feel the improved response, plus i have to clean the Apexi filter more often than i did the 3A, which tells me it is picking up more of the dirt rather than letting it through.

thanks for the info. New for me. gonna get one for my 33 :)

LOL looks like i am advertising for 3A... personally didnt belive such cheap pod can do better than any other brands but with my opinion, the price of the brand name is there for a reason, so lastly i had choose Apexi pod for my 33. for whatever reason it just seems like a scam to me lol no offense but just unbelieveabe. I would say i can give it a try but not on my 33 or may be my daily (In case to see how it goes) haha.

Im fitting 1 to my GTiR Racecar, Good power, good filtering and cheap enough to replace often. Ive seen the results 1st hand and can think of lots of other places the extra money could really help. The money saved is the difference between good DS3000 Brake pads and sensational RS14 Pagid for example.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...