Jump to content
SAU Community

Recommended Posts

Guys i was looking into some pod yesterday, was thinking of which pod actually suit me better for my 33 until i saw an article about 3A racing pod. I believe you guys know its a cheap pod and probably can get it from supercheap or repco. amazingly the 3A racing pod do better than any pod that we are using today like apexi, hks, and more famous brands. below is a link to show you the magic of these pod! Its a short article but with fancy pictures so will not be boring, starting today change your pod filters to 3A racing pod lol.

Go to

http://www.3aracing.com.au/HTML%20Folder/0...erShootOut.html

Click

Read Article

Link to comment
https://www.sau.com.au/forums/topic/321542-unbelieveable-3a-racing-pod/
Share on other sites

what a joke .

what is the piont of a FILTER . to FILTER particles out of the air that damage your engine . get something that filters properly and if you can prove on the dyno it is a restriction get a bigger filter untill it is not

having plenty of experience with filters on moto x bikes the general consesus is oiled cotton and oiled foam are on par with each other while clean but when dirty the k&n will outflow the foam ones due to more surface area

although rush goes some way towards fixing this with its contoued outer surface

http://www.uniflow.com.au/contents/media/A...sh%20Filter.jpg

Years ago Xspeed tested all the big name Filters on my Dyno, the $20 dollar specials were the highest power outputs and now afte all the years theres been no damage from poor filtration. Many of the mega Dollar stainless mesh big name jobs catch small animals and rocks and nothing else.

dont know with you other guys that are running these filters, do yous have really loud induction noise and some flutter too. with my 180 i have this filter and sounds like the turbo is spooling up and its not even boosting, sounds cool tho.

Yeh i personally don't believe it. I take these tests with as much seriousness as tests of flow on catalytic converters. It is very easy to over clock the flow rate and then quote the filter rate at the bench flow rate. Everybody looks at the flow rate and goes oh wow it MUST be good, but then don't stop to think that the quoted filterage could be taken at a lower flow rate.

I used to have a 3A filter on my car. Replaced it with an Apexi and i could definitely feel the improved response, plus i have to clean the Apexi filter more often than i did the 3A, which tells me it is picking up more of the dirt rather than letting it through.

thanks for the info. New for me. gonna get one for my 33 :)

LOL looks like i am advertising for 3A... personally didnt belive such cheap pod can do better than any other brands but with my opinion, the price of the brand name is there for a reason, so lastly i had choose Apexi pod for my 33. for whatever reason it just seems like a scam to me lol no offense but just unbelieveabe. I would say i can give it a try but not on my 33 or may be my daily (In case to see how it goes) haha.

Im fitting 1 to my GTiR Racecar, Good power, good filtering and cheap enough to replace often. Ive seen the results 1st hand and can think of lots of other places the extra money could really help. The money saved is the difference between good DS3000 Brake pads and sensational RS14 Pagid for example.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I used to have Walbro 255's when they were a pretty common update. (or were they 044? 040?) In any case I had a dirty tank. I thought the tank was good, but I would find the filter would clog in maybe ~50km of driving. If the issue persists, well, your fuel system or tank has crap in it that the pump is sucking up.
    • Hi. Ok thanks for the info. I/we do not know what tune is on that Nistune ECU so it is why there is stock ECU and that Nistune is for later when the car is done. I have guy who tunes Nistune and other ECU so i will then take it to him to see and properly tune for the car   And for the update. On 99,9% it is bad fuel pump. Which is wierd cuz it is like 2 years old(brand new walbro 255) and that filter (also brand new) was dirty.  I was alwaya pumped premium(100) on very good petrol station so i dont know how is that possible...  
    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
×
×
  • Create New...