Jump to content
SAU Community

Recommended Posts

Guys i was looking into some pod yesterday, was thinking of which pod actually suit me better for my 33 until i saw an article about 3A racing pod. I believe you guys know its a cheap pod and probably can get it from supercheap or repco. amazingly the 3A racing pod do better than any pod that we are using today like apexi, hks, and more famous brands. below is a link to show you the magic of these pod! Its a short article but with fancy pictures so will not be boring, starting today change your pod filters to 3A racing pod lol.

Go to

http://www.3aracing.com.au/HTML%20Folder/0...erShootOut.html

Click

Read Article

Link to comment
https://www.sau.com.au/forums/topic/321542-unbelieveable-3a-racing-pod/
Share on other sites

what a joke .

what is the piont of a FILTER . to FILTER particles out of the air that damage your engine . get something that filters properly and if you can prove on the dyno it is a restriction get a bigger filter untill it is not

having plenty of experience with filters on moto x bikes the general consesus is oiled cotton and oiled foam are on par with each other while clean but when dirty the k&n will outflow the foam ones due to more surface area

although rush goes some way towards fixing this with its contoued outer surface

http://www.uniflow.com.au/contents/media/A...sh%20Filter.jpg

Years ago Xspeed tested all the big name Filters on my Dyno, the $20 dollar specials were the highest power outputs and now afte all the years theres been no damage from poor filtration. Many of the mega Dollar stainless mesh big name jobs catch small animals and rocks and nothing else.

dont know with you other guys that are running these filters, do yous have really loud induction noise and some flutter too. with my 180 i have this filter and sounds like the turbo is spooling up and its not even boosting, sounds cool tho.

Yeh i personally don't believe it. I take these tests with as much seriousness as tests of flow on catalytic converters. It is very easy to over clock the flow rate and then quote the filter rate at the bench flow rate. Everybody looks at the flow rate and goes oh wow it MUST be good, but then don't stop to think that the quoted filterage could be taken at a lower flow rate.

I used to have a 3A filter on my car. Replaced it with an Apexi and i could definitely feel the improved response, plus i have to clean the Apexi filter more often than i did the 3A, which tells me it is picking up more of the dirt rather than letting it through.

thanks for the info. New for me. gonna get one for my 33 :)

LOL looks like i am advertising for 3A... personally didnt belive such cheap pod can do better than any other brands but with my opinion, the price of the brand name is there for a reason, so lastly i had choose Apexi pod for my 33. for whatever reason it just seems like a scam to me lol no offense but just unbelieveabe. I would say i can give it a try but not on my 33 or may be my daily (In case to see how it goes) haha.

Im fitting 1 to my GTiR Racecar, Good power, good filtering and cheap enough to replace often. Ive seen the results 1st hand and can think of lots of other places the extra money could really help. The money saved is the difference between good DS3000 Brake pads and sensational RS14 Pagid for example.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...