Jump to content
SAU Community

Recommended Posts

On boost is great too.

My 20det on most days would start singing at 2k and make 10psi at 3k, but for everyday driving I found I had to change gears a lot, it bogged down a lot in low revs.

The 25 with r34 turbo starts around 1.9k and 10psi around 2.5k, but even off boost, say 2k through 4k, I can stay in gear without needing to down shift, like going up highway/freeway onramps, stop start traffic, etc. It's much more tail happy too.

It climbs through the revs with a 5kg flywheel about the same as the 20 with a standard flywheel.

I should've just bought this 25 two years ago haha.

Do it man, you won't look back.

  • 2 weeks later...

I hope all you haters are jelly.

vcwcns.jpg

1113uo2.jpg

f0vno6.jpg

Now, stay tuned for fitment of THIS

2s1ofo5.jpg

zlugya.jpg

On teh way in the next container.

Hopefully less hold ups on this one.

Oh and for the record, 25DET still running flawlessly every day, unlike that god damned RB20.

Best thing I ever did getting rid of that dudd.

  • 2 weeks later...
  • 4 weeks later...

Was starting to hear a harsh scraping sound at low speeds, gradually became louder.

First thought was low brake pads/rotors, but then I kind of got my head around the idea that maybe, finally, the shithouse bearings on the JJR hubs had finally thrown in the towel, since they last about 10'000km max.

Brakes were getting a bit low anyway, and I'd already bought pads, so I swapped out my rotors for another set, got mine machined, and after about half an hour of looking around my house, shed, room, and in both cars, I found the brake pads I'd picked up ages ago.

28gtvlu.jpg

Did work at my own house (gravel driveway), and took my sweet ass time.

Was a royal PITA trying to get the pistons in the calipers to retract to fit the new pads over the rotors.

Found the source of that scraping sound too.

5l1dg8.jpg

The other 7 pads were fine, at around 25%

Finished last corner after about 2 hours.

2h560wx.jpg

Ran pads in at local industrial area. They're pretty damn noisy between 15kmp/h and 0, but pedal feels twice as good as it did with standard Sumitomo pads.

JJR wheel bearings are still in tip top condition, 35'000kms and still going strong!

New world record!

Edited by Nic_A31

lol

nick it seems your taking after myself a bit, as you know i did the same to my rears, not too long ago did the same on the front pads!

now the point is to take off my calipers and check them properly at times

whats the deal with these JJR bearings, on paper it says they only last 10,000kms? they better not be pricey to replace

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...