Jump to content
SAU Community

Recommended Posts

The front mount will be fine. Doesn't really have any effect on your emissions.

RED513 is right on the money. Cat and o2 sensor checks and you'll be right to go.

Unless you have drastically changed the amount of fuel (injectors) or air (turbo), then you have no need for an aftermarket ecu. (for emissions, of course. Always power benefits from a tune! :rofl2:)

The front mount will be fine. Doesn't really have any effect on your emissions.

RED513 is right on the money. Cat and o2 sensor checks and you'll be right to go.

Unless you have drastically changed the amount of fuel (injectors) or air (turbo), then you have no need for an aftermarket ecu. (for emissions, of course. Always power benefits from a tune! :rofl2: )

nah only mod is fmic and exhaust had pod but put standard airbox back on

how do i know if the cat thats on there is good enuf

  • 1 month later...

hey guys had car emissions tested and it bombed out real bad so im thinkin of just doing what the tuner said and get the aftermarket ecu but he also said that nistune will not have the paremeters that i need 2 get it to pass

any one know where i can get a power fc

or does any one know anything about microtech as they are in my area and will install 4 1400

nistune and power fc are very similar, just the power fc has more resolution in the maps. nistune will do fuel & ignition, closed loop corrections, after start / cold start and acceleration enrichment, what else do you need to get a good tune to pass emissions. microtech are alright, but its not an ecu i'd be picking, especially for an emissions pass.

Get another tuner! Nistune will tune your engine fine. When you say bombed out on emissions test what was the problem? Do you have any numbers, readout? Did you replace the cat convertor? With an almost standard car its ridiculous to be telling you that you need a Microtech.

Get another tuner! Nistune will tune your engine fine. When you say bombed out on emissions test what was the problem? Do you have any numbers, readout? Did you replace the cat convertor? With an almost standard car its ridiculous to be telling you that you need a Microtech.

ive got a read out here somewhere ill have to scan it and post it and no i didnt change the cat the exhaust place said they only put cats on that meet australian standards and yeah the tuner is saying power fc but i think h just wants to try n make some extra money out of me wants 2 charge me 2500 then tuning on top

try and find out what make the cat is

x-force cats are notorious for their poor performance (both power and emissions wise)

catco and metalcat are supposed to be good tho

and x2 on the nisstune being as good if not better for emissions

have you changed your o2 sensor while you have owned the car? if not, replace it asap its probably the main reason it failed the test cos the ecu can't see how rich its running

Actually a "lean" tune will fail the IM240 test.

The tune must be such that the levels of CO, hydrocarbons, and NOx gasses are all within regulations.

A lean tune will fail just as hard as a rich tune will.

As quoted above, it's not about how filthy rich your tune may be but the gases that are created by the combustion of O2 and fuel.

It is imperative that you have a catalytic converter that is able to convert the gases into other gases that aren't measured in the IM240 test.

This is why decat pipes are illegal and carry a hefty fine for emissions.

hey guys had car emissions tested and it bombed out real bad so im thinkin of just doing what the tuner said and get the aftermarket ecu but he also said that nistune will not have the paremeters that i need 2 get it to pass

any one know where i can get a power fc

or does any one know anything about microtech as they are in my area and will install 4 1400

you know what i think about this bloke man, just get nistune!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mainly being afraid of breaking something on something i've poured so much money into haha
    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
×
×
  • Create New...