Jump to content
SAU Community

Recommended Posts

isn't biodiesel, well, for diesel engines? i understand the idea: green alternative and good prices in bulk, but skylines are performance engines that may not take kindly to major changes in fuel, but i may be corrected on that.

if you want to run greener you have a few options, you can go extreme and run E85 if its in your area, there's a few threads on that. but get a good tuner to help. if not see if you can run e15 fuel alright (apparently the RON's vary wildly).

also just drive carefully. changing your driving style is the best (lol and most difficult) way to save fuel. also make sure your oil is good, tyres are the right pressure and not excessively wide (same with the rims), make sure you're not carrying much unnecessary weight, maybe even get an economy tune? all will save fuel... im sure there are many more things escaping my mind atm, but there's heaps of simple gains to be made

Edited by Galois
Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5266861
Share on other sites

isn't biodiesel, well, for diesel engines? i understand the idea: green alternative and good prices in bulk, but skylines are performance engines that may not take kindly to major changes in fuel, but i may be corrected on that.

if you want to run greener you have a few options, you can go extreme and run E85 if its in your area, there's a few threads on that. but get a good tuner to help. if not see if you can run e15 fuel alright (apparently the RON's vary wildly).

also just drive carefully. changing your driving style is the best (lol and most difficult) way to save fuel. also make sure your oil is good, tyres are the right pressure and not excessively wide (same with the rims), make sure you're not carrying much unnecessary weight, maybe even get an economy tune? all will save fuel... im sure there are many more things escaping my mind atm, but there's heaps of simple gains to be made

what gave it away? the fact that it is called "bioDIESEL"? lol, sorry mate, couldn't resist throwing that in. not having a go at you, more at the OP wondering out putting it into a car without realising that it is a diesel replacement and not a petrol replacement.

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5267206
Share on other sites

if by any chance you are running a late model tdi engine with common rail injection in a navara or triton etc it is strongly not recommended to run bio in them, and any problems resulting from running it will not be warranted.

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5282394
Share on other sites

Buy a Prius

Not much chance on converting an NA skyline to Bio-Diesel.

Unless you stick an RD28 In there

Not such a crazy idea.... but it's gonna cost and be heavy.

RD28ET from a late model patrol into a skyline would be interesting....

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5286414
Share on other sites

  • 2 weeks later...

lol surely he isnt asking about biodiesel in a skyline???

If he talking about using it in a diesel engine, there is nothing wrong with it. Biodiesel acts as a detergent and flushes out your fuel tank and lines of crap. So its advised to replace the fuel filter a couple of times at the beginning because these can get clogged up quickly. Any stories about cars blowing up from biodiesel is because they didnt replace their fuel filters during the first couple of uses of it.

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5308870
Share on other sites

No, you are wrong, biodiesel is the biggest load of shit going around. Every week we get some poor guy thats screwed up his fuel pump due to the poor lubrication characteristics of the "cooking oil mixture".

Diesel Fuel pumps rely on the lubrication characterisits of conventional diesel oil to maintain the internal parts from excessive wear and tear, bio diesel does not do this, has nothing to do with fuel filter changing.

we also find that some bio diesel mixtures going around can actually increase the temperatures ontop of the engine and cause piston damage and also the nozzles in the injectors to fail (ie melt closed).

Please also note that damage we see from biodiesel in fuel pumps is quite distinct from common wear and tear failures of fuel pumps also. facts are facts.

Hell, i love the idea that people are running it from a financial point of view as we make a shit load of money on it!!

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5309280
Share on other sites

No, you are wrong, biodiesel is the biggest load of shit going around. Every week we get some poor guy thats screwed up his fuel pump due to the poor lubrication characteristics of the "cooking oil mixture".

Diesel Fuel pumps rely on the lubrication characterisits of conventional diesel oil to maintain the internal parts from excessive wear and tear, bio diesel does not do this, has nothing to do with fuel filter changing.

we also find that some bio diesel mixtures going around can actually increase the temperatures ontop of the engine and cause piston damage and also the nozzles in the injectors to fail (ie melt closed).

Please also note that damage we see from biodiesel in fuel pumps is quite distinct from common wear and tear failures of fuel pumps also. facts are facts.

Hell, i love the idea that people are running it from a financial point of view as we make a shit load of money on it!!

lol im sorry Im not wrong.

I did a project at university regarding the use of biodiesel with the head professor of combustion at Monash University.

info here; http://www.monash.edu/research/directory/?...uery=0000036169

But I guess I should tell him he is wrong about biodiesel

If you bothered to google "Biodiesel lubrication" you will see that biodiesel is a much better lubricator than regular diesel. Here is a very simple explanation: http://www.wisegeek.com/what-is-biodiesel-fuel.htm

"Biodiesel is a much better lubricant than petro-diesel and extends engine life -- even a small amount of biodiesel means cleaner emissions and better engine lubrication: 1% biodiesel added to petro-diesel will increase lubricity by 65%." - http://journeytoforever.org/biodiesel.html

Biodiesel has better lubricating properties and much higher cetane ratings than today's lower sulfur diesel fuels. Biodiesel addition reduces fuel system wear,[27] and in low levels in high pressure systems increases the life of the fuel injection equipment that relies on the fuel for its lubrication. Depending on the engine, this might include high pressure injection pumps, pump injectors (also called unit injectors) and fuel injectors.

Older diesel Mercedes are popular for running on biodiesel.

The calorific value of biodiesel is about 37.27 MJ/L.[28] This is 9% lower than regular Number 2 petrodiesel. Variations in biodiesel energy density is more dependent on the feedstock used than the production process. Still these variations are less than for petrodiesel.[29] It has been claimed biodiesel gives better lubricity and more complete combustion thus increasing the engine energy output and partially compensating for the higher energy density of petrodiesel.[30]

Biodiesel is a liquid which varies in color — between golden and dark brown — depending on the production feedstock. It is immiscible with water, has a high boiling point and low vapor pressure. *The flash point of biodiesel (>130 °C, >266 °F)[31] is significantly higher than that of petroleum diesel (64 °C, 147 °F) or gasoline (−45 °C, -52 °F). Biodiesel has a density of ~ 0.88 g/cm³, less than that of water.

Biodiesel has virtually no sulfur content, and it is often used as an additive to Ultra-Low Sulfur Diesel (ULSD) fuel.

Biodiesel cleans out all the crap in the fuel system, so that is causing your problems, not lubrication problems.

Here is some info about the crap and maintenance - http://alternativefuels.about.com/od/gener...iodiesmaint.htm

Also attached is a thesis regarding engine testing with bio-diesel.

Biodiesel_20Engine_20Testing.pdf

If you still have doubts, you can email the Doctor of combustion and you can kindly hear it from the horses mouth.

But hey, I guess im wrong :)

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5310964
Share on other sites

Your "study" is inadequate for your argument.

Sure, you have proved that by using a 20% biodiesel and 80% normal diesel mixture, that the engine didnt cook or loose performance, but this has never occured in a matter of 10 hours anyway.

Im talking about 100% biodiesel. Im talking about 20,000kms + of use. Your study did not go this far so you cannot tell me as a conclusion that, biodiesel is great rah rah rah.

In day to day use, you can never control the quality of fuel that your getting from servos anyway so it makes it hard to argue for and against. We have also seen plenty of people ruin their fuel pumps due to water contaminated diesel.

As i said earlier, we have pulled apart fuel pumps that have run biodiesel for extended periods of time and have found unique wear and tear characteristics. You can go on and on about lubrication, but there is obviously something thats working against the OEM demands of the fuel.

I may not be able to explain my self with evidence as i havent put hours of research into it, im not a diesel technician, nor am i an engineer. However i have seen the results of extended use of biodiesel with my own eyes, my dad and his technicians dont bag it out to their customers for shits and giggles, and certainly not for any personal gain as it actually results in the opposite.

I will try my best to take pictures of examples when we get another biodiesel customer lol. I actually still have a set of nozzles that were removed from a land cruiser that was running biodiesel, there was obvious signs of overheating, i will take some pictures of this soon :down:

Edited by snozzle
Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5311381
Share on other sites

100% biodiesel sounds like homebrew (old cooking oil) and as you can see from the report (not mine btw, found it on the internet) there is a noticeable power loss and fuel consumption.

If the person is running a commercially available B20 blend, I can not see how it can cause any extended wear as research indicates a much better lubrication and engine life.

Running 100% is silly, it would turn into a sludge on cold days. 20% is the ideal, shudder running 100% haha.

but yeah my biodiesel days ended back in 2008, im sure the professor I mentioned above would have a lot more information and possibly a root cause to your observations. Feel free to contact him, he will be more than happy to throw in his 2cents.

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5311554
Share on other sites

haha yeah i was referring to 100% biodiesel from the start but thanks for extending my knowledge abit further on the b20 mixture, i can see how it can actually have better lubrication over normal diesel, but im not game enough to comment any futher on mixtures ive never seen used before

your paper was a good read though, thanks for sharing

edit: if your test was actually on 100% biodiesel, and you ran the engine for alot longer, id love to see the results of that!

Edited by snozzle
Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5311564
Share on other sites

i saw a program the other day showing how a guy had a home setup and was making biodiesel. was pretty interesting. he was making it from old cooking oil he got from take away places. was interesting to see. went through most of the steps as to how he did it, and the chemicals he added.

Link to comment
https://www.sau.com.au/forums/topic/322377-biodiesel/#findComment-5311963
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...