Jump to content
SAU Community

Radius Rod Mounts

adrnln

By adrnln,
in Four Door Family & Wagoneers

 Share

Recommended Posts

adrnln Proficient

adrnln

Posted
  • Author
Posted

Wicked I knew thier would be a interechangeable one.

I rang a few places and they said that you can only use Cefiro ones.

Cool I have a few things I'm looking at doing set up wise to increase my suspension and steering capabilities.

And I will be looking at getting those bushed from Nolathane soon trying replace them all.

esky_mad Proficient

esky_mad

Posted
Posted

if your talking about the castor rod bracket which it sounds like you are (pic added)

then these are A31 specific so the shops you rang were correct. i think nic means the caster rods themselves? which are the same as S13 but defnitely not the bracket itself.

post-33033-1274965052_thumb.jpg

DanShirts Collaborator

DanShirts

Posted
Posted (edited)

There isn't any magic to it.. I just welded some metal on the ends. It's pretty thick metal, 8-10mm.

I drilled a hole in the right one (left in the pic) for the radiator support. My left rad support is broken off, so I didn't drill a hole for it.

You can't see it, but I also welded a bar between them. Like the Nismo ones.

I'm not in Au, so I don't know... but I bet this will get you defected.

k4fpxw.jpg

Edited by DanShirts
Dan_J Veteran

Dan_J

Posted
Posted

i see, so they bolt up the same as the cefiro ones but just come up too short. well thats sorted u can use s13 castor brackets if u weld a plate on to lengthen them.then just drill a hole for the front rad support bolts

gud stuff :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...