Jump to content
SAU Community

Recommended Posts

Hi, I've found another car that some of you may be keen on.... however, this car was at Edward Lees before it made it to auction.. go figure :bunny:

http://www.pickles.com.au/cars/vehicle/CP-...lotid-103149596

Link to youtube video,

You guys can clearly see build plate at the one minute mark or so 186/400 :)

EDIT: Is that a mismatched bonnet I see?

Edited by Game
Link to comment
https://www.sau.com.au/forums/topic/323076-subaru-impreza-22b-wrx-at-pickles/
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

I love them but i wouldn't buy a private import one, in australia they are worth a fraction of the price an aussie delivered 22b would get, fake km's, no books, no spare keys, it's an Edward Lee car.

Then again in 30 years time it'll be worth sending back to japan to sell it there and make a pretty penny with their enthusiasts.

Beautiful car but it shouldn't have come over to Australia, lol at Edward Lee

i'd pay $80k for one of the OZ delivered ones with full service history, 100% original parts, full key set, great condition, genuine low milage. I wouldn't consciously pay more than $40k for that car especially when there is no history at all, for all we know it's been written off and some smart guy has repaired it and shipped it over here.

Back up a bit kids - for all you know, the car may well be legit and the owner has it at Edward Lee's on consignment, hence the fact that it is also going through Pickles.

Given there were only 5 or so sold locally in Australia, you'd have a 0% chance of picking up one for less than $100K, and so that's actually a pretty reasonable price for what it is. Definitely a collectible.

Back up a bit kids - for all you know, the car may well be legit and the owner has it at Edward Lee's on consignment, hence the fact that it is also going through Pickles.

Given there were only 5 or so sold locally in Australia, you'd have a 0% chance of picking up one for less than $100K, and so that's actually a pretty reasonable price for what it is. Definitely a collectible.

lol at Edward Lee for consignment, that's suicide.

I know you can get an import in aswell Cheff, but the fact is an OZ delivered just got $90k, I'd rather the OZ delivered at that price than an import pushing $70-$80k purely because you will definately get your money back later.

0% picking one up? there was an OZ delivered 22b at either mosman or double bay for sale last month or month before for $90k, service history and prestine condition. (aparently it was OZ delivered).

I started looking into them when an old guy drove one to visit my neighbour a few months ago. An import 22b as an investment is a fail.

10 year old performance car costing $70k with no history isn't worth that price, but if you really want one and your not fussed about resell then your not fussed about price, in which case you might aswell offer $200k for the car...

Same thing with exotic imports, for starters they are worth alot less, 2nd they usually have major problems as they dont have service records and their is no history of the car, 3rd they are next to impossible to sell (unless its for race use or you find a cashed up sucker to buy it).

It's like getting one of our OZ delivered 22b's and sending it to Japan to sell, it will always be worth allot less than the original jap ones they have there.

as i keep saying in every other thread about this sort of thing

if someone wants to pay that for a car - let them

they're getting a decent price for a rare car

no spare keys no service history? who cares, you're buying a car - not a bunch of statistics n paperwork

A neat 22b in Japan still sells for 3.5-4 million yen as a minimum (for one worth having) so that's a purchase price of $50k ish just in Japan, before you pay freight, duties and so on. For me, a good one is worth every bit of $70k for if it popped up, but I have lusted after a 22B for the last 12 years so in my eyes, they're very desireable car.

Normally I'd be inclined to agree with locally delivered models being worth more - this is certainly the case with the 2 door version 5 STI which was offered in 1999, we only got 399 of them. But in Japan, the 2 door STI is nothing special as it was just another car available in the Subaru lineup. However in the case of the 22b, there were only 400 of them made available world wide and god knows how many have been rallied into the ground by now. Hand made alloy widebody guards, stroked motor, DCCD and that fat stance.. I'd give my left nadular for one :kiss: I wouldn't care if the car came from Antarctica originally, they're a car that's going to be worth very big dollars in the future in my humble opinion!

A neat 22b in Japan still sells for 3.5-4 million yen as a minimum (for one worth having) so that's a purchase price of $50k ish just in Japan, before you pay freight, duties and so on. For me, a good one is worth every bit of $70k for if it popped up, but I have lusted after a 22B for the last 12 years so in my eyes, they're very desireable car.

Normally I'd be inclined to agree with locally delivered models being worth more - this is certainly the case with the 2 door version 5 STI which was offered in 1999, we only got 399 of them. But in Japan, the 2 door STI is nothing special as it was just another car available in the Subaru lineup. However in the case of the 22b, there were only 400 of them made available world wide and god knows how many have been rallied into the ground by now. Hand made alloy widebody guards, stroked motor, DCCD and that fat stance.. I'd give my left nadular for one :) I wouldn't care if the car came from Antarctica originally, they're a car that's going to be worth very big dollars in the future in my humble opinion!

no one says they are not going to keep going up, but here in OZ, the OZ delivered one for $90k with history ect, Versus a $70+ jap/uk import. The OZ delivered will be the thing that sells the car if you ever have to, and you will get much much more interest in it in Australia, even if they were identical cars inside and out, for a difference of $20k today could mean $50k+ difference in 10 years time when it's time to sell, not to mention 9 people out of 10 would rather buy the OZ delivered than a private import.

If I was buying a 22b, I would have bought the OZ delivered one a couple months ago over a private import purely because I know it is the better choice between the two and chances are I won't be sitting on it for 6 months waiting for it to sell like an import 22b would if it came tme to sell it.

If it wasn't for Subaru bringing a few out to OZ, the import ones would be selling for $90k instead of $70k

no one says they are not going to keep going up, but here in OZ, the OZ delivered one for $90k with history ect, Versus a $70+ jap/uk import. The OZ delivered will be the thing that sells the car if you ever have to, and you will get much much more interest in it in Australia, even if they were identical cars inside and out, for a difference of $20k today could mean $50k+ difference in 10 years time when it's time to sell, not to mention 9 people out of 10 would rather buy the OZ delivered than a private import.

If I was buying a 22b, I would have bought the OZ delivered one a couple months ago over a private import purely because I know it is the better choice between the two and chances are I won't be sitting on it for 6 months waiting for it to sell like an import 22b would if it came tme to sell it.

If it wasn't for Subaru bringing a few out to OZ, the import ones would be selling for $90k instead of $70k

You're right in respect of those Aussie ones having a greater value locally, but the truth is there were only 4 brought to Australia - one of which is owned by Nick Senior (Subaru Aust CEO) and the others in the hands of some very very lucky buggers! I'd honestly rather save the $20-30k and buy an import as I'd HAVE to use the car on a regular basis - but spending $90k on a car like that, I'd be inclined to do minimal KMs to preserve it's value down the track.

What I do think though, is that the collectibility of these cars on an international level in years to come will be the primary driver of their value. Their rarity will drive the demand and it will be the condition of the car, not the country it was delivered in that's going to matter.

Now I just need to win lotto, get my hands on one and wait :rofl:

I think someone at DOTARS must own one, that's why they introduced the rule of only permitting one personal import every 5 years instead of every 12 months - reduces their competition!

lol at Edward Lee for consignment, that's suicide.

I know you can get an import in aswell Cheff, but the fact is an OZ delivered just got $90k, I'd rather the OZ delivered at that price than an import pushing $70-$80k purely because you will definately get your money back later.

0% picking one up? there was an OZ delivered 22b at either mosman or double bay for sale last month or month before for $90k, service history and prestine condition. (aparently it was OZ delivered).

I started looking into them when an old guy drove one to visit my neighbour a few months ago. An import 22b as an investment is a fail.

10 year old performance car costing $70k with no history isn't worth that price, but if you really want one and your not fussed about resell then your not fussed about price, in which case you might aswell offer $200k for the car...

Same thing with exotic imports, for starters they are worth alot less, 2nd they usually have major problems as they dont have service records and their is no history of the car, 3rd they are next to impossible to sell (unless its for race use or you find a cashed up sucker to buy it).

It's like getting one of our OZ delivered 22b's and sending it to Japan to sell, it will always be worth allot less than the original jap ones they have there.

The one you refer to at Double Bay was the one at Vaucluse, I think you will find, and it was a recently arrived Japanese import.

There was an Australian delivered one sold through a dealer in North Sydney about 2 years ago and that went for over $100,000.

Wow the car got passed in at $59k, guess you guys were wrong wern't you, import 22b's are worth even less than I even thought it was going to get at auction, I thought it would hit atleast $63 because of excited enthusiasts. I still don't think it's worth more than $40k + transfer, auction fee, rego, ect... so something around $50k all up is what it is worth maximum in todays climate in this country.

Wow the car got passed in at $59k, guess you guys were wrong wern't you, import 22b's are worth even less than I even thought it was going to get at auction, I thought it would hit atleast $63 because of excited enthusiasts. I still don't think it's worth more than $40k + transfer, auction fee, rego, ect... so something around $50k all up is what it is worth maximum in todays climate in this country.

Sorry, I didn't realise this was a competition :)

... :wacko:

I wouldn't have put a car like that through auction personally, it's such a specific type of market and customer, you've just got to sit on your hands until the right person comes along. Like selling a historic or classic car - to the right person, they're worth the money. Plenty of people want them but can't justify the price for what would be a sunday driver.

I agree with IM. There was a GTHO Phase III that went through Shannons and it only fetched $331,000. Seller was expecting much more as an identical car sold for almost double that last year. There were also talks of other cars that sold for over a mil through private treaty a few years ago.

I'd certainly be pissed if your collectable would only fetch a fraction of what other cars have been selling for in the past..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...