Jump to content
SAU Community

Recommended Posts

hey guys selling my rb25det neo engine out of my r34 gtt

engine has done 80k

serviced religiously every 3000km and is still in the car so can be seen running before purchase

goodies with engine are

major service complete water pump timing belt and idler pulleys

gt3071r garrett ballbearing turbo bought brand new with reciepts cost 3k for kit

custom screamer pipe to suit 3071r from am performance

exedy heavy duty cusion button clutch bought brand new with reciepts and machined fly wheel

complete motor asking $4k with all bolt ons

bob 0433696875 south east suburbs melb

pics up soon but im sure u kno wat an rb25det looks like

Link to comment
https://www.sau.com.au/forums/topic/323182-r34-gtt-rb25det-neo-engine/
Share on other sites

to answer most of your guys questions im not keen on seperating unless i have buyers for all the gear.

as for you jack im selling bcoz i was looking at the price of rebuilds for rb25det and the cost was decently high and when my panel beater suggested he has a motor thats already built i was keen to purchase his motor. as we all kno worked motors arent cheap so the only way i can come up with the funds is if i sell my motor. car wasnt in a smash car is bare shell at the moment as i am doing paint inside and out. motor is still in car so it can be seen running and comp tests are more then welcome. motor is a1.

motor was ment to make 230 - 240rwkw with a 12psi tune with stock injectors

280rwkw with 600cc injectors and a z32 afm on 18psi

i never got a tune done as the turbo has only just seen 3000km use on 7psi before i took apart the car for paint.

reason i like this turbo setup is the boost comes in around 3000rpm and its got plenty of kick.

very nice street package and cant even be seen as i made a nice matt black heat shield.

i can tell ya everything and anything u need to know about it got all the reciepts and tech talk

pics up soon

May be interested... just wondering why your selling it??? you wrecking the car because of a crash?

cheers, jack.

How much power did it make with the 3071?

cheers, jack.

i am interested in purchasing the engine and transmisson

the transmission is a 4 speed automatic tip tronic

very serious

please tell price

hey guys selling my rb25det neo engine out of my r34 gtt

engine has done 80k

serviced religiously every 3000km and is still in the car so can be seen running before purchase

goodies with engine are

major service complete water pump timing belt and idler pulleys

gt3071r garrett ballbearing turbo bought brand new with reciepts cost 3k for kit

custom screamer pipe to suit 3071r from am performance

exedy heavy duty cusion button clutch bought brand new with reciepts and machined fly wheel

complete motor asking $4k with all bolt ons

bob 0433696875 south east suburbs melb

pics up soon but im sure u kno wat an rb25det looks like

i am interested in purchasing the engine and transmisson

the transmission is a 4 speed automatic tip tronic

very serious

please tell price

this ad is for the engine only and price stands at 4k

not auto

haha nah mate not auto it is a MANUAL motor thus the heavy duty clutch. but as i said engine only no gearbox. not AUTo not AUto.

no drama goes straight into r32

ohh is this out of an auto??? hmmm makes it abit harder.. cos flywheel and shit is different is it not??? i am gonna be putting it into an r32
  • 2 months later...
  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...