Jump to content
SAU Community

Recommended Posts

Quick question on changing a not too loud exhaust

I just brought a r33 T for a month, start considering to change the exhaust since its too loud for me (arr.. for my gf actually....)

im a newbie anyway :) so please give me some advice on this, how much does it cost in Perth if i want it quiet and also good performance (reduce sound and not restrict)

already did some search on this site but found thats not a good idea to put a silencer

(the car is pretty stock, no mod on engine/turbo)

Thanks

Edited by Bariskycord
Link to comment
https://www.sau.com.au/forums/topic/323340-r33-gtst-exhaust-is-too-loud/
Share on other sites

she will get use to the noise, its prob not even that loud haha, wait till you hear my 180sx, rb20 no cat 3inch all the way then twin 2.5 inch tips.

also do you know what exhaust system you have atm, like is it straight 3inch from cat or does it have a muffler also. and how loud we are talking about here if you can explain.

but if you really have to. just do what bubba said to do, should cost a few hundred, depending if you have stainless or mild steel. not sure on what brand but i am sure the exhaust place should help you out.

there is a cheaper way but it looks funny, is putting a silencer on the tip of the cannon (if you have one)

also do you know what exhaust system you have atm, like is it straight 3inch from cat or does it have a muffler also. and how loud we are talking about here if you can explain.

how to tell what kind of exhaust system I got? I only found there are "genie" on the muffler ,4"

My gtr got quieter once i removed the muffler 3 1/2 inch straight through to resonator now and it is one of the quietest Lines on the road

u mean u take off the whole thing from the muffler to the resonator on mid pipe? it ll looks missing sth at the back

auctually i just want to know is that true "for t sport car, the quieter the exhaust the larger the back pressure, the greater the damage to the engine"?

u mean u take off the whole thing from the muffler to the resonator on mid pipe? it ll looks missing sth at the back

auctually i just want to know is that true "for t sport car, the quieter the exhaust the larger the back pressure, the greater the damage to the engine"?

i had the muffler cut out and a piece of 3 1/2 inch exhaust pipe welded in its place

get a couple hot dog mufflers welded into your exsisting system, it'l drop down the droan of the note without creating a huge restriction and in turn quiet down the rawr comming out of the end. or if you really want to quiet it down get a massive muffler put in the middle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...