Jump to content
SAU Community

C34 - Central Locking (with Alarm) - Driver's Door.

pyro-ns
 Share

Recommended Posts

pyro-ns Community Regular

pyro-ns

Posted
Posted

Hi all,

Have just put an alarm in the girl's stag and everything's going fine except for one thing, the driver's side door won't unlock when you press the unlock button. The rest of the doors and the boot all unlock fine. The driver's side door still unlocks with the key, from the outside as well.

I know with s13's and the like, there is no central locking mechanism in the driver's side door from factory. I also know the chances of a door coming with an unlock function, but without a lock function, are astronomically small, but thought I'd ask anyway.

So yeah, has anyone else had anything screwy happen to their driver's side lock function? Or is something broken on mine? I guess I should be looking in the door first? Seeing as the control box is obviously working, i mean.

Cheers guys :)

josh

Big Fella Mentor

Big Fella

Posted
Posted

hey mate,

where did you tap into the wiring for the alarm? for my alarm we went straight onto the back of the circuit board in the central locking controller which is on lhs up between the glovebox and the kick panel.

there is also a central locking controller on the drivers side but this won't activate the drivers door, only the passenger doors and trunk lock.

QWK32 Veteran

QWK32

Posted
Posted

Hey mate, I'm back in town and have reception now. Did you pic up off those points I showed you? Is it just the unlock function that won't work, or the lock as well? Only thing I can think of if you did pick up off that circuit board is, did you make sure you used a negative trigger, I think from memory my alarm had the option of both positve and negative triggers and you have to make sure you use the right one.

pyro-ns Community Regular

pyro-ns

Posted
  • Author
Posted (edited)

hey guys,

yes, i used the passenger side control box and the doors are set to negative trigger by default. and yes, just the unlock function on the driver's door only that's not working :blink:

now the damn battery is flat as well... i've done something wrong...

Edited by pyro-ns
QWK32 Veteran

QWK32

Posted
Posted
hey guys,

yes, i used the passenger side control box and the doors are set to negative trigger by default. and yes, just the unlock function on the driver's door only that's not working :blink:

now the damn battery is flat as well... i've done something wrong...

did you have a key with the lock/unlock buttons on it, if so does it still work? try and figure out if its just a problem of your wiring, or it the keyless entry control box has been damaged.

pyro-ns Community Regular

pyro-ns

Posted
  • Author
Posted

you mean a factory key with unlock buttons? did they come from factory with keyless entry?? all i've got is the regular key, no buttons no nothing :)

i'm starting to lean towards the control box being damaged. i've noticed a bit modified wiring/repairs in the car (moreso on the driver's side), so anything could have happened :P

false alarm on the flat battery. am guessing it's from having the door (dome light) on all day. the battery was already tired to begin with (still has jap writing on it, haha). gave it a charge yesterday afternoon, took it for a drive and it kicked over again this morning.

another thing too, what did you do about the indicator control on the un/lock control box? whenever i press a button now, the indicators flash wildly, because the un/lock box is telling it to flash at the same time as the alarm :blink: can i just snip a wire or 2 off the plug to the un/lock control box?

QWK32 Veteran

QWK32

Posted
Posted (edited)

yeah i got a key with a lock and unlock button, and a normal one. they must not have found one when yours come over. and my indicators never flashed when locking and unlocking before the alarm. those 2 wires you joined onto the circuit board, if you just tap them to ground you should be able to lock and unlock all the doors that way, just to test the module is still working fine.

Edited by QWK32
reiseva Contributor

reiseva

Posted
Posted

talking to a alarm company awhile ago getting a quote and they said if it didn't have factory key-less entry, for stags they usually have to install a lock actuator in the drivers side. bout a week ago was talking to a installer bout the same topic and he said that there should be one in there from factory but if it didn't have key-less entry it wont be hooked up to the rest.

as Ive said this is just secondhand info not completely sure but worth a look.

goodluck

pyro-ns Community Regular

pyro-ns

Posted
  • Author
Posted
yeah i got a key with a lock and unlock button, and a normal one. they must not have found one when yours come over. and my indicators never flashed when locking and unlocking before the alarm. those 2 wires you joined onto the circuit board, if you just tap them to ground you should be able to lock and unlock all the doors that way, just to test the module is still working fine.

i tested it when i connected the wires, but i just heard the doors going off and thought, "Great! it's working!!!" <_< and no, no central locking key for me... bastards...

talking to a alarm company awhile ago getting a quote and they said if it didn't have factory key-less entry, for stags they usually have to install a lock actuator in the drivers side. bout a week ago was talking to a installer bout the same topic and he said that there should be one in there from factory but if it didn't have key-less entry it wont be hooked up to the rest.

as Ive said this is just secondhand info not completely sure but worth a look.

goodluck

shit :domokun: ah well, at least it gives me somewhere to look i guess. i didn't spot any burn marks on the central locking setup, so i'll probably check out the driver's door first then. will be a good opportunity to size up speaker replacements if we ever decide to do that as well. cheers for the info :D

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

my factory one locked me out in the rain, it would open but then the alarm would sound, and i have before in another activated the immobiliser, not much fun.

so i was standing in the rain trying to trick the car, very tempted to kick the shit out of my car, but knowing its a rust bucket i didnt wanna put my foot through the door.

never used the stupid factory alarm again.

QWK32 Veteran

QWK32

Posted
Posted

Hahahaha lol. The factory alarm was only an option Josh. Mine didn't have it. But I'm sure the keyless entry was a standard feature on the S2's, that's what the white contol box on the passenger side does. First off I'd be checking the contol boxs operation by manually grounding those cables to see if all the doors lock, remeber all the doors have to be shut for it to work. Then if you still have no joy, your drivers side lock actuator might be disconnected or faulty. Wasn't your rear auto closer disconnected for some random reason.

Did you figure out the blinker crazyness? I know that once the alarm has gone off, once you disarm, the blinkers will flash a number of times to let you know what zone had gone off. Could this be what your seeing, I had it all the time when I didymium install as I kept testing each bit I did.

pyro-ns Community Regular

pyro-ns

Posted
  • Author
Posted
Hahahaha lol. The factory alarm was only an option Josh. Mine didn't have it. But I'm sure the keyless entry was a standard feature on the S2's, that's what the white contol box on the passenger side does. First off I'd be checking the contol boxs operation by manually grounding those cables to see if all the doors lock, remeber all the doors have to be shut for it to work. Then if you still have no joy, your drivers side lock actuator might be disconnected or faulty. Wasn't your rear auto closer disconnected for some random reason.

Did you figure out the blinker crazyness? I know that once the alarm has gone off, once you disarm, the blinkers will flash a number of times to let you know what zone had gone off. Could this be what your seeing, I had it all the time when I didymium install as I kept testing each bit I did.

nah, the rear auto door's fuse had popped. i just wasn't smart enough to check the simple things first :thumbsup:

the blinker craziness is definitely the control box + the alarm sending so many signals at once. on the girl's stag, the blinkers used to flash on lock and unlock, before we put the alarm in (i think it was twice for lock and once for unlock?). so that, plus the signals that the alarm is sending, is what's giving the Gabber night club effect :thumbsup:

i've got to fix the door on the colt properly first, then i'll get back to the stag. the colt got a new aerial and headunit on the weekend. still some tidying up to do on it first. there were obviously no DIN slots in the 80's... had to cut the surround out so that the headunit would fit :S

  • 2 years later...
QWK32 Veteran

QWK32

Posted
Posted

Can anybody point me in the direction of where this central locking control box is located & what it looks like or take a photo of it please!?

On the passenger side behind the air vent. Remove the glove box to get to it. On the S2 it is a white box.

Troppo Explorer

Troppo

Posted
Posted

On the passenger side behind the air vent. Remove the glove box to get to it. On the S2 it is a white box.

Thanks QWK32, hopefully that's my issue and the S1 are the same!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • myrbgivesmeheadaches
      RB25DET NEO Cylinder Head

      By myrbgivesmeheadaches · Posted

      Did this end up working? Did you take some pictures?
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...