Jump to content
SAU Community

Recommended Posts

clutches aren't really hard to install so where is a good place is dependent on your location

and clutch type is dependent on how much power you wish to make

my recommendations are with NPC who i have built a good relationship with

clutches aren't really hard to install so where is a good place is dependent on your location

and clutch type is dependent on how much power you wish to make

my recommendations are with NPC who i have built a good relationship with

where abouts is NPC?

I live at glandore about 7 kms out of the cbd, know any decent workshops in the area?

please ALWAYS use the search function. This topic has been covered hundreds of times before. Since you are a newbie I will let you off and not delete your thread, but ALWAYS check the stickied threads - in this case particularly this one:

http://www.skylinesaustralia.com/forums/Wo...st-t123887.html

Read the forum rules here:

http://www.skylinesaustralia.com/forums/boardrules.html

and ALWAYS, ALWAYS, ALWAYS use the search function at the top right of the forums to see if your question has been asked/covered before.

getting a pedal box welded up is easy

yes, but having one pop (when out n about from home usually) some time after installing a heavy clutch isnt fun :domokun:

People squeal and get all excited and slap the heaviest clutch in and there* with no reason to.

*Assuming the car is stock again, and that the OP has no mechanical knowledge

i bought my clutch off an online dealer....he also deals on habibay......but i got everything for $350 delivered and my car makes roughly 250rwkw.....its holding up alright so far 8 months on and has see 1 full on thrashing at the track day....its called the F1 racing clutch

getting a pedal box welded up is easy

Not trying to hijack the thread at all, but my accelerator pedal pivot point has recently snapped at the top weld point (bottom one is still fine, so the car is drivable and it's also being held in by the carpet/backing there).

Who would I go to to get this fixed? I would imagine it's a fair bit of work, cos the welding could end up setting interior stuff on fire? And there's a lot of carpetting/backing around the accelerator pedal? I've searched the threads, and only found one other person this has happaned to (who's posted about it anyway), and they just riveted it in-place (despite everyone else in the thread telling them to just get it welded). Thoughts?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...